Corsair HARPOON RGB Шасси (Main Board): main rev 1.0
Please follow the directions below: 1: Unplug your mouse from the computer. 2: Locate the small pinhole underneath your mouse. For some, this will be located directly on the bottom in plain sight. On others, it will be located underneath one of the removable weights attached to the bottom of the mouse. 3: Using a small paperclip or push-pin, press down on the button inside the pinhole. 4: Plug your mouse back into the computer, while holding down the pinhole button. 5: Once it is plugged back in, your computer should recognize a drive called CRP_Disabled. Please open this. 6: Download the firmware file from the ticket. If it is compressed into a .RAR file, please extract this file to an easily found location on the computer. 7: Delete the file FIRMWARE.BIN from the CRP_DISABLED drive, and then place the file with ISP in its name to the CRP_Disabled drive. 8: Once you have performed the steps above, please unplug your mouse and then plug it back in. The device will then return to normal.
Если прошивка находится не на нашем сервере, а на сторонних сайтах (ЯндексДиск, ГуглДиск и т.д) , сообщите в этой теме , укажите ссылку на этот материал.
Всего комментариев: 0
Добавлять комментарии могут только зарегистрированные пользователи. [ Регистрация | Вход ]
Файлы
Прошивки
Продажа
Литература
Статьи
