Спецы по HDD, подскажите - Компьютерная и оргтехника - стр-1 - Другая техника

REMONT-AUD.NET

Ремонт бытовой техники и электроники

Меню +

Страница 1 из 2
1
2
»

Спецы по HDD, подскажите

Konstantin®

Автор темы

Информация +

И так имеется:
Model Family: SAMSUNG SpinPoint F3 EG series
Device Model: SAMSUNG HD503HI
Serial Number: S23CJ9FZ606047
Firmware Version: 1AJ10001
User Capacity: 500,107,862,016 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 6
Local Time is: Tue Aug 7 00:48:18 2012 ALMT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
Есть подозрение на заболевание данного диска.
Есть утилита GsmartControl, которая позволяет проверить состояние HDD, но не позволяет его лечить.
При тестировании есть некоторые ошибки, суть которых мне не совсем понятна, в общем прошу помощи, знающих людей. blush

Complete error log:

SMART Error Log Version: 1
ATA Error Count: 446 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 446 occurred at disk power-on lifetime: 679 hours (28 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 00 00 00 a0

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ec 00 00 00 00 00 a0 08 00:00:02.327 IDENTIFY DEVICE
00 00 01 01 00 00 40 08 00:00:02.327 NOP [Abort queued commands]
25 00 18 50 0b d5 e0 08 00:00:02.327 READ DMA EXT
27 00 00 00 00 00 e0 08 00:00:02.327 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 08 00:00:02.327 IDENTIFY DEVICE

Error 445 occurred at disk power-on lifetime: 679 hours (28 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 00 00 00 a0

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ec 00 00 00 00 00 a0 08 00:00:02.315 IDENTIFY DEVICE
ef 03 42 00 00 00 a0 08 00:00:02.315 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 08 00:00:02.314 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 08 00:00:02.314 IDENTIFY DEVICE
00 00 01 01 00 00 40 08 00:00:02.314 NOP [Abort queued commands]

Error 444 occurred at disk power-on lifetime: 679 hours (28 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 00 00 00 a0

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ec 00 00 00 00 00 a0 08 00:00:02.299 IDENTIFY DEVICE
00 00 01 01 00 00 40 08 00:00:02.299 NOP [Abort queued commands]
25 00 38 68 08 83 e0 08 00:00:02.299 READ DMA EXT
27 00 00 00 00 00 e0 08 00:00:02.299 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 08 00:00:02.299 IDENTIFY DEVICE

Error 443 occurred at disk power-on lifetime: 679 hours (28 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 00 00 00 a0

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ec 00 00 00 00 00 a0 08 00:00:02.255 IDENTIFY DEVICE
ef 03 42 00 00 00 a0 08 00:00:02.255 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 08 00:00:02.255 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 08 00:00:02.255 IDENTIFY DEVICE
00 00 01 01 00 00 40 08 00:00:02.255 NOP [Abort queued commands]

Error 442 occurred at disk power-on lifetime: 679 hours (28 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 00 00 00 a0

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ec 00 00 00 00 00 a0 08 00:00:02.243 IDENTIFY DEVICE
ef 03 42 00 00 00 a0 08 00:00:02.243 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 08 00:00:02.243 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 08 00:00:02.243 IDENTIFY DEVICE
00 00 01 01 00 00 40 08 00:00:02.243 NOP [Abort queued commands]

[06.08.2012, 22:54]