�~������GM8135S S160803
NOR ID:ef4016
w3Bmode
sz:0xe8000.Boot..
eI-Cache is ON
D-Cache is ON
Elapse=10907420

GM8136 for FreeRTOS(v8.2.1) image, build date: Nov 23 2017, 14:41:45

Compiler Tools = GNU CC

-----------------------------------------------------
ID: 8136110
AXI: 200  AHB: 200  PLL1: 712  PLL2: 600  PLL3: 540
CPU: 712  DDR:  950
JPG: 237  H264: 237
-----------------------------------------------------
SPI020 Revision:0x10100
len=4
SPI NOR ID code:0xef 0x40 0x16
SPI jump setting is 3 bytes mode
erase sector size = 4096,12, page size = 256,8, size = 16777216,22
flash signature = GM8136
len=4
ADDA308 current use MCLK=24568965
error: varify header failed
ftpwmtmr010 address = 0x91b00000
I2C polling mode
Reset MCP100 start
event=1,value=0
Internal RTC with OSCL (32768Hz)
FILE_JPEG_BUF_START = 0x01004000
Event Handle
CarDVR UI Handler
pwm add id
pwm add id
UI 16
- Base Clock Frequency: Min 400000 Hz, Max 100000000 Hz.
- Max Block Length: 0x200 bytes.
- 8-bit: No, ADMA2: Yes, HS: Yes, SDMA: Yes, S/R: No, Voltage: 0x3,SDR50/104,DDR50: 0x5.

Checking card ... Inserted.
- Base Clock Frequency: Min 400000 Hz, Max 100000000 Hz.
- Max Block Length: 0x200 bytes.
- 8-bit: No, ADMA2: Yes, HS: Yes, SDMA: Yes, S/R: No, Voltage: 0x3,SDR50/104,DDR50: 0x5.

Checking card ... Not Inserted.
ftsdc021_get_sd_div target clk = [400000/400000], div=125
<1> SDLK Freq select, Div: 125, Clock: (400000) Hz, * RTC Current: Sun Jan  1 00:00:01 2017
PWR_CTL=1
* Load Samoon_cfg From SPI Flash .................[OK]

0:2106

1:2106
ft3dnr_init
stream_num=1
FT3DNR200 Version 2015_0331_1324
request IRQ42 with ft3dnr_interrupt() ok!
res_cfg=3175a8
chan_param=317630
FT3DNR sp.0 buf size 0x4600 width 1920 height 1088 phy addr 0x3177f8
FT3DNR mot.0 buf size 0x210 width 1920 height 1088 phy addr 0x31be00
FT3DNR var.0 buf size 0x280 width 1920 height 1088 phy addr 0x31c028
FT3DNR ref.0 buf size 0x3fc000 width 1920 height 1088 phy addr 0x1c18100
3dnr buf sp=3177f8, mot=31be00, var=31c028, ref=1c18100
ft3dnr_drv_init ok
[ISP_INFO]: gm_isp_drv_init
isp_callback=0, isp_cfg_data[2]=0
ISP328 v1.66, built @ Mar  1 2017 10:49:42
USE_DMA_CMD: TRUE
[ISP_INFO]: idma_cmd     pa=0x010acf00, va=0x010acf00, size=0x00001000
[ISP_INFO]: odma_cmd     pa=0x010adf00, va=0x010adf00, size=0x00001000
[ISP_INFO]: hist_sta_buf pa=0x010af300, va=0x010af300, size=0x00000200
[ISP_INFO]: ae_sta_buf   pa=0x010af500, va=0x010af500, size=0x00000168
[ISP_INFO]: awb_sta_buf  pa=0x010ace80, va=0x010ace80, size=0x00000028
[ISP_INFO]: af_sta_buf   pa=0x010acec0, va=0x010acec0, size=0x00000028
[ISP_INFO]: awb_seg_sta_buf0  pa=0x010af680, va=0x010af680, size=0x00018000
[ISP_INFO]: awb_seg_sta_buf1  pa=0x010c7680, va=0x010c7680, size=0x00018000
ISP Alogrithm v2.10
Register [0][GM_AE]
Register [1][GM_AWB]
Register [2][GM_AF]

b:2109
[ISP_INFO]: ov9732_init
[ISP_INFO]: ov9732_construct
[ISP_INFO]: isp_plat_cap_rst_init
EXT_CLK output ==> 27000000Hz
CAP driving capacity = 0
[ISP_INFO]: isp_plat_extclk_onoff
INTR: ERR## ... Command Timeout.
<ipx=0> command error 1
[ISP_INFO]: Sensor Interface : PARALLEL
[ISP_INFO]: xclk=27000000, pclk=35775000
[ISP_INFO]: adjust_blk fps=25, vmax=962
[ISP_INFO]: hts=1478, t_row=413, sw_lines_max=958
[ISP_INFO]: Found [GM_AE]
[ISP_INFO]: Found [GM_AWB]
[ISP_INFO]: Found [GM_AF]
load default isp cfg
isp_adj_task 2212
allocate 0x2fd000 size
info->va_addr = 348568
info->phy_addr = 348600
ref_ddr-> va = 348568,ref_ddr->size = 2fd000
allocate 0x1680 size
info->va_addr = 647ED0
info->phy_addr = 647F00
FAVC Encoder v0.1.127.10, built @ Jun 29 2017 09:09:10 (GM8136)
H264 rate control version: 1.2.5.3, rc method = 1, built @ Jun 29 2017 09:09:13

Create
CarDVR mode

>>>>> file record initial
  =====================================================
  =  AVAILABLE_MEM_START                 0x01420000   =
  =-------------- SPI Flash Buffer -------------------=
  =  SSP_DMA_LINK                       0x01441010   =
  =  SSP_PCM_OUT_BUF                    0x014422D0   =
  =-------------- Audio Buffer -----------------------=
  =-------------- ISP, Capture, Scalar Buffer --------=
  =  CAP0_PATH0_YUV422_BUF0              0x014BBB00   =
  =  CAP0_PATH0_YUV422_BUF1              0x014D7D00   =
  =  CAP0_PATH0_YUV422_BUF2              0x014F3F00   =
  =  CAP0_PATH1_YUV422_BUF0              0x01510100   =
  =  CAP0_PATH1_YUV422_BUF1              0x016D2100   =
  =-------------- H.264 Encoder Buffer ---------------=
  =-------------- MP4 Encoder Buffer -----------------=
  =  MP4_ENC0_CURRENT_ADDR               0x01894100   =
  =  MP4_ENC1_CURRENT_ADDR               0x01A56100   =
  =-------------- Video Chunk Buffer ---------------=
  =  FILE0_H264_BUF0_START               0x01DDA100   =
  =  FILE0_H264_BUF0_END                 0x02DDA100   =
  =-------------- GSensor Buffer -------------------=
  =  MEM_END_ADDRESS_1                  0x02E91740   =
  =  MEM_END_ADDRESS                0x03900000   =
  =  SYSTEM_MEMORY_UI 129
SIZE               0x04000000   =
do_3dnr_task

What big timestamp 2267

   h   

What big timestamp 70

Found SD Memory Card Version 1.X. ORC=80ff8000
ftsdc021_get_sd_div target clk = [400000/400000], div=125
<1> SDLK Freq select, Div: 125, Clock: (400000) Hz, ftsdc021_get_sd_div target clk = [25000000/25000000], div=2
div = 2, clk = 25000000
<2> SDLK Freq select, Div: 2, Clock: (25000000) Hz,  INTR: ERR## ... Data CRC.
error sts
transfer_data error 20
read addr 0 ,cnt 1 FAILED.
INTR: ERR## ... Data CRC.
error sts
transfer_data error 20
read addr 0 ,cnt 1 FAILED.
INTR: ERR## ... Data CRC.
error sts
transfer_data error 20
read addr 0 ,cnt 1 FAILED.
INTR: ERR## ... Data CRC.
error sts
transfer_data error 20
read addr 0 ,cnt 1 FAILED.
INTR: ERR## ... Data CRC.
error sts
transfer_data error 20
read addr 0 ,cnt 1 FAILED.
INTR: ERR## ... Data CRC.
error sts
transfer_data error 20
read addr 0 ,cnt 1 FAILED.
INTR: ERR## ... Data CRC.
error sts
transfer_data error 20
read addr 0 ,cnt 1 FAILED.
INTR: ERR## ... Data CRC.
error sts
transfer_data error 20
read addr 0 ,cnt 1 FAILED.
INTR: ERR## ... Data CRC.
error sts
transfer_data error 20
read addr 0 ,cnt 1 FAILED.
INTR: ERR## ... Data CRC.
error sts
transfer_data error 20
read addr 0 ,cnt 1 FAILED.
SD[Err 1]: Read Sector 0 Count 1

TotalDiskSize = 954
- Base Clock Frequency: Min 400000 Hz, Max 100000000 Hz.
- Max Block Length: 0x200 bytes.
- 8-bit: No, ADMA2: Yes, HS: Yes, SDMA: Yes, S/R: No, Voltage: 0x3,SDR50/104,DDR50: 0x5.

Checking card ... Not Inserted.
do_adjust_task
INTR: ERR## ... Data CRC.
error sts
transfer_data error 20
read addr 0 ,cnt 1 FAILED.
INTR: ERR## ... Data CRC.
error sts
transfer_data error 20
read addr 0 ,cnt 1 FAILED.
INTR: ERR## ... Data CRC.
error sts
transfer_data error 20
read addr 0 ,cnt 1 FAILED.
INTR: ERR## ... Data CRC.
error sts
transfer_data error 20
read addr 0 ,cnt 1 FAILED.
INTR: ERR## ... Data CRC.
error sts
transfer_data error 20
read addr 0 ,cnt 1 FAILED.
INTR: ERR## ... Data CRC.
error sts
transfer_data error 20
read addr 0 ,cnt 1 FAILED.
INTR: ERR## ... Data CRC.
error sts
transfer_data error 20
read addr 0 ,cnt 1 FAILED.
INTR: ERR## ... Data CRC.
error sts
transfer_data error 20
read addr 0 ,cnt 1 FAILED.
INTR: ERR## ... Data CRC.
error sts
transfer_data error 20
read addr 0 ,cnt 1 FAILED.
INTR: ERR## ... Data CRC.
error sts
transfer_data error 20
read addr 0 ,cnt 1 FAILED.
SD[Err 1]: Read Sector 0 Count 1

TotalDiskSize = 954
INTR: ERR## ... Data CRC.
error sts
transfer_data error 20
read addr 0 ,cnt 1 FAILED.
INTR: ERR## ... Data CRC.
error sts
transfer_data error 20
read addr 0 ,cnt 1 FAILED.
INTR: ERR## ... Data CRC.
error sts
transfer_data error 20
read addr 0 ,cnt 1 FAILED.
INTR: ERR## ... Data CRC.
error sts
transfer_data error 20
read addr 0 ,cnt 1 FAILED.
INTR: ERR## ... Data CRC.
error sts
transfer_data error 20
read addr 0 ,cnt 1 FAILED.
INTR: ERR## ... Data CRC.
error sts
transfer_data error 20
read addr 0 ,cnt 1 FAILED.
INTR: ERR## ... Data CRC.
error sts
transfer_data error 20
read addr 0 ,cnt 1 FAILED.
INTR: ERR## ... Data CRC.
error sts
transfer_data error 20
read addr 0 ,cnt 1 FAILED.
INTR: ERR## ... Data CRC.
error sts
transfer_data error 20
read addr 0 ,cnt 1 FAILED.
INTR: ERR## ... Data CRC.
error sts
transfer_data error 20
read addr 0 ,cnt 1 FAILED.
SD[Err 1]: Read Sector 0 Count 1

--- RL 180s ---
Mounted
F Finish
F init success

((((((((((((((AND THIS PART REPEATING RAPIDLY WITHOUT STOPS )))))))))))))))))))))

what xQueue_data_to_rtspd fail 0

I2C TX 0x7 TO!
xs byte I2C_bus_write not OK
HI2C_write  I2C_bus_write not OK
I2C TX 0x7 TO!
xs byte I2C_bus_write not OK
HI2C_write  I2C_bus_write not OK

what xQueue_data_to_rtspd fail 0

I2C TX 0x7 TO!
xs byte I2C_bus_write not OK
HI2C_write  I2C_bus_write not OK
X508 I2C Write  error

I2C_Handshake() err=-1:

check fail
ftwdt010dog_init
Watchdog reset time: 5!
Watchdog reset time: 1!
event=1,value=2
usbd go
Stream Task 0
READY2
usb_init
UI 17
READY3
usb_task
MSDC_Init
UI 70

   fps=105
>>cpu=0%

wa=2344D38,len=109D38,c=30
usb_detected=1
USB Host detected
event=3,value=3
0go.��GM8135S S160803
NOR ID:ef4016
w3Bmode
sz:0xe8000.Boot..
_I-Cache is ON
D-Cache is ON
Elapse=10461017
ну и дальше как обычно