Группа:
Участники
Сообщений:21 Благодарности: Страна: Российская Федерация
Город: Орел
Дата регистрации: 14.07.2015
Программатор: rt809h
Осциллограф: Rigol ds1102e
Паяльная станция: профессиональное паяльное оборудование
Mainboard R2402-MB-C NAND W29N02KV
Ищу дамп. Или помощь в восстановлении прошивки. Робот плавно мигает двумя белыми светодиодами. По логам циклическая перезагрузка. Напряжения все присутствуют. Лог с зажатой кнопкой s и средней кнопкой пылика.
[321]HELLO! BOOT0 is starting! [324]sbrom commit : 846e3c522904fcb00516d9a9db9315bae0585638
[352]key press : s [443]key not pressed anymore [1105]run out of boot0 M/TC: OP-TEE version: 0c5d51e3-dirty (gcc version 5.3.1 20160412 (Linaro GCC 5.3 -2016.05)) #1 2022? 04? 08? ??? 01:50:45 UTC arm M/TC: arisc version: [sun8iw5_v0.03.00-527-g1e7fea4]
secure enable bit: 1 secure mode: with secureos optee version: major:3 minor:7 [1.201]rsb init by cpus [1.201]pmbus: ready [1.202]PMU: AXP858 [1.204]PMU: AXP858 found [1.206]rsb read failed, flag 0x1: 1STE !! [1.210]axp2585 read error probe axp858 failed [1.214]bat_vol=0, ratio=-1 [1.217]set power on vol to default [1.219]dc1sw_vol = 3300, onoff=1 [1.223]dcdc6_vol = 3300, onoff=1 [1.225]aldo1_vol = 3300, onoff=0 [1.228]aldo5_vol = 2500, onoff=0 [1.231]dcdc3_vol = 900, onoff=0 [1.234]cldo2_vol = 3300, onoff=0 [1.237]find power_sply to end [1.240]PMU: cpux 1008 Mhz,AXI=504 Mhz [1.243]PLL6=600 Mhz,AHB1=200 Mhz, APB1=100Mhz MBus=400Mhz DRAM: 512 MiB [1.251]fdt addr: 0x5acd4aa0 [1.252]gd->fdt_size: 0x159e0 Relocation Offset is: 15def000 gic: sec monitor mode [1.312]power on cpu1 [1.312]set cpu on by secure os [1.313][cpu1]task entry [1.313][cpu1]PowerBus = 0( 2:vBus 3:acBus other: not exist) [1.313][cpu1]no battery exist [1.313][cpu1]display init start [cpu1]drv_disp_init [cpu1]init_clocks: finish init_clocks. [1.322]power on cpu2 [1.322]set cpu on by secure os [1.323][cpu2]task entry [cpu1]drv_disp_init finish [1.323][cpu2]ready to work [1.323]flash init start [1.325][cpu1]fetch script boot_disp.output_disp fail [cpu2]bmp lzma decode err workmode = 0,storage type = 0 [1.336][cpu2]cpu 2 enter wfi mode [1.333][cpu1]fetch script boot_disp.output_type fail [1.339]NAND: [1.346][cpu1]fetch script boot_disp.output_mode fail NAND_UbootInit [1.352][cpu1]fetch script data boot_disp.auto_hpd fail [1.353]NAND_UbootInit start [1.358][cpu1]disp0 device type(1) enable [1.361]NB1: enter NAND_LogicInit [cpu1]drv_lcd_open_callback lcd open flow is NULL! LCD enable fail! [1.372]nand_set_gpio_power 488 use default 3.3V [1.373][cpu1]display init end [1.365][cpu2]set cpu off by secure os [1.384]uboot: nand version: 3 6037 20201211 17550849 [1.389]not burn nand partition table! [1.392]NB1: nftl num: 1 [1.394]init nftl: 0 [1.885][ND] not find panic data, no need to recovery! [1.885]NB1: NAND_LogicInit ok, result = 0x0 [1.885]NAND_UbootInit end: 0x0 [1.885]sunxi flash init ok [1.887]GPT partition init ok no item name widevine in the map sunxi storage read fail secure storage read widevine fail [1.887]secure storage read fail [1.890]Widevine key install fail !!! no item name ec_key in the map sunxi storage read fail secure storage read ec_key fail no item name rsa_key in the map sunxi storage read fail secure storage read rsa_key fail no item name ec_cert1 in the map sunxi storage read fail secure storage read ec_cert1 fail no item name ec_cert2 in the map sunxi storage read fail secure storage read ec_cert2 fail no item name ec_cert3 in the map sunxi storage read fail secure storage read ec_cert3 fail no item name rsa_cert1 in the map sunxi storage read fail secure storage read rsa_cert1 fail no item name rsa_cert2 in the map sunxi storage read fail secure storage read rsa_cert2 fail no item name rsa_cert3 in the map sunxi storage read fail secure storage read rsa_cert3 fail [1.959]keymasters key install finish env and backup env are not synchronized,now to synchronize load key rpmb_key with default cb no item name rpmb_key in the map sunxi storage read fail secure storage read rpmb_key fail secure storage read rpmb_key fail with:-1 load key dm_crypt_key with default cb no item name dm_crypt_key in the map sunxi storage read fail secure storage read dm_crypt_key fail secure storage read dm_crypt_key fail with:-1 [2.018]flash init end [2.020]try to burn key no item name key_burned_flag in the map sunxi storage read fail sunxi secure storage has no flag [2.031]usb burn from boot delay time 0 weak:otg_phy_config [2.037]usb prepare ok [2.839]overtime [2.839]do_burn_from_boot usb : no usb exist root_partition is rootfs1 --------fastboot partitions-------- -total partitions:10- -name- -start- -size- UDISK : 8700000 5b7b000 env : 80000 80000 boot1 : 100000 500000 rootfs1 : 600000 3700000 boot2 : 3d00000 500000 rootfs2 : 4200000 3700000 private : 7900000 80000 misc : 7980000 300000 pstore : 7c80000 80000 bak : 7d00000 a00000 ----------------------------------- set root to /dev/nand0p4 [2.875][mmc]: MMC Device 2 not found [2.878]base bootcmd=run setargs_nand boot_normal [2.882]bootcmd set setargs_nand [2.885]key 51 [2.886]cant find rcvy value [2.889]cant find fstbt value [2.892]misc partition found [2.894]to be run cmd=run setargs_nand boot_normal [2.902]drm_base=0x60000000 [2.902]drm_size=0x0 [2.903](sunxi):update dtb dram start [2.907]update dtb dram end no item name rootwait init in the map sunxi storage read fail no item name rdinit in the map sunxi storage read fail no item name blkoops.blkdev in the map sunxi storage read fail [2.925]inter uboot shell [2.927]Version: U-Boot 2014.07-g56d6864 (Sep 04 2024 - 15:49:37) Allwinner Techn ology dreame saveenv storage_type = 0 [2.998]read partition: boot or recovery [3.172]sunxi flash read :offset 100000, 2930688 bytes OK Android's image name: organ-perf1 Kernel load addr 0x40008000 size 2856 KiB RAM disk load addr 0x41000000 size 1 KiB begin to verify rootfs squashfs len:43704320, part len:57671680 find rootfs key stored in root certif partition rootfs1 verify pass total_len=2928640 in boot normal mode,pass normal para to cmdline android.hardware = sun8iw15p1 [3.317]ready to boot [3.317]check cpu power status [3.317][cpu1]cpu 1 enter wfi mode [3.317]cpu2 has poweroff [3.340][cpu1]set cpu off by secure os [3.340]cpu1 has poweroff [3.342]prepare for kernel NAND_UbootExit [3.342]NB1: NAND_LogicExit [3.348] Starting kernel ...
Группа:
Участники
Сообщений:101 Благодарности: Страна: Российская Федерация
Город: Москва
Дата регистрации: 03.09.2022
Программатор: Z3x, mini pro,
Осциллограф: UNI-T UTD2102CEX
Паяльная станция: профессиональное паяльное оборудование
Для просмотра сообщения Вы должны быть Участником форума. Для этого Вам необходимо Зарегистрироваться и пройти Тест.
Группа:
Участники
Сообщений:4 Благодарности: Страна: Российская Федерация
Город: Москва
Дата регистрации: 30.06.2020
Программатор: Mini Pro, ip box
Осциллограф: МЕГЕОН 15010
Паяльная станция: паяльная станция (паяльник+фен)
Для просмотра сообщения Вы должны быть Участником форума. Для этого Вам необходимо Зарегистрироваться и пройти Тест.
Fmvoice
Для просмотра сообщения Вы должны быть Участником форума. Для этого Вам необходимо