оУART_115200

AC_ON
SSCFL
5

SSCFL
BIST0-OK
BIST1-OK
_U
Relocation Offset is: 01200000
[AT][MB][start ub][443]

U-Boot 2011.06-00000-g6018a87-dirty (Jul 24 2019 - 14:42:59) MBOT-1106.0.10.1430095

DRAM_SIZE1=256 MB DRAM_SIZE2=256 MB DRAM_SIZE3= MB
msIR_Initialize
[SYS][Utopia]: Function = SYSOpen, Line = 815, current resource pri_shm content is: 0
[SYS][Utopia]: Function = SYSOpen, Line = 834, [SYS INFO] OPEN INSTANCE...
create instance at 297EAA38 with private size 108 bytes at 297EAA80
[MIU][Utopia]:
[MIU INFO] miu opencreate instance at 297EAAF0 with private size 80 bytes at 297EAB38
create instance at 297EAB90 with private size 48 bytes at 297EABD8

uboot held at [295DDF60~2AD00000],size=017220A0
CPU : Messi
Board: BD_MST091B_10ASXG_15281_MESSI
DRAM: 173 MiB
Now running in RAM - U-Boot at: 29E00000

eMMC: HS200 200MHz
eMMC 3.63 GB [747FF8h]
In: serial
Out: serial
Err: serial
Net: No ethernet found.
Get MAC from ethaddr env
MAC: 0x78: 0xDD: 0xD9: 0x4A:0x73: 0xF9
#######################################################################
#######################################################################
[AT][MBoot][Driver Init][660]

<env reload for CHECK_IF_MBOOT_DEFAULT_ENV>
mmc change mount : system
** File not found /etc/set_env
[ERROR] loadscript:757: No enough buffer or path fail(/etc/set_env) :
[src/MsUtility.c] [loadscript]

Changelist: 24543697
============= set bootargs ===============
Hit any key to stop autoboot: 0
AC on
====cvte power on check usb and upgrade ====
<628> do_cvte_init_at_prama4env
Check USB port[0]:
[USB] usb_lowlevel_init++
[USB] USB EHCI LIB VER: 2014.06.09
[USB] Port 0 is Enabled
[USB] TV_usb_init (UTMI Init) ++
[USB] UTMI Base 1F207500
[USB] UHC Base 1F204800
[USB] USBC Base 1F200E00
[USB] BC Base 1F246C00
[USB] config miu select [30] [74] [FF] ][FF]
[USB] TV_usb_init--
[USB] Usb_host_Init++
[USB] Async base addr: 0xAC8D080
[USB] Reg 0x28: 0xD080 0xAC8
[USB] disable run
[USB] Host Speed:2
[USB] Host type:2
[USB] enable aynch
[USB] Usb_host_Init--
[USB] usb_lowlevel_init--
scanning bus for devices... [USB] USBSTS USB Error...
[USB] Send Error USBSTS Status:3
[USB] USB Error Interrupt Event...
[USB] bQHStatus:48
[USB] qHD Status => Halted (Stall/Babble/Error Counter=0)...0x48
[USB] qHD Status => HOST20_qTD_STATUS_TransactionError...
Error, bad or unsupported device...
Check USB port[1]:
[USB] usb_lowlevel_init++
[USB] USB EHCI LIB VER: 2014.06.09
[USB] Port 1 is Enabled
[USB] TV_usb_init (UTMI Init) ++
[USB] UTMI Base 1F207400
[USB] UHC Base 1F201A00
[USB] USBC Base 1F200F00
[USB] BC Base 1F246C40
[USB] config miu select [30] [74] [FF] ][FF]
[USB] TV_usb_init--
[USB] Usb_host_Init++
[USB] No USB is connecting
[USB] USB init failed
[USB] usb_lowlevel_init--
Error, couldn't init Lowlevel part
Check USB port[2]:
[USB] usb_lowlevel_init++
[USB] USB EHCI LIB VER: 2014.06.09
[USB] Port 2 is Enabled
[USB] TV_usb_init (UTMI Init) ++
[USB] UTMI Base 1F207200
[USB] UHC Base 1F227200
[USB] USBC Base 1F227000
[USB] BC Base 1F246C80
[USB] config miu select [30] [74] [FF] ][FF]
[USB] TV_usb_init--
[USB] Usb_host_Init++
[USB] Async base addr: 0xAC8D080
[USB] Reg 0x28: 0xD080 0xAC8
[USB] disable run
[USB] Host Speed:2
[USB] Host type:2
[USB] enable aynch
[USB] Usb_host_Init--
[USB] usb_lowlevel_init--
scanning bus for devices... [USB] control1 max:40

[USB] interface[0] conf:1 value FF:
1 USB Device(s) found
scanning bus for storage devices... 0 Storage Device(s) found
FAIL : can not init usb!!

<628> custar = -1

<628> USB Disk Not Found

<CVTE> do_cvte_get_mac_from_emmc
block_data[0]:78
block_data[1]:DD
block_data[2]:D9
block_data[3]:4A
block_data[4]:73
block_data[5]:F9
<628> Read MAC Value-->78:DD:D9:4A:73:F9
<628> EMMC MAC-->78:dd:d9:4a:73:f9 , ENV MAC-->78:dd:d9:4a:73:f9

<338> do_cvte_init_at_env_by_value AT_Read=0 OR AT_B=0 OR AT_T=0 OR AT_K=0 OR AT_BOOTCH=0:
Same as console=ttyS0,115200 androidboot.console=ttyS0 root=/dev/ram rw rootwait init=/init KDebug=1 delaylogo=true androidboot.selinux=permissive swiotlb=512 SAR5=ON LX_MEM=0x1EB00000 LX_MEM2=0xA0400000,0x1FC00000 EMAC_MEM=0x40000 PM51_ADDR=0x20010000 PM51_LEN=0x10000 CMA0=OTHERS,miu=0,hid=23,sz=0x3000000,st=0x5c00000 CMA1=VDEC_XC_STR_MBOOT,miu=0,hid=20,sz=0x3000000,st=0x8c00000 CMA2=RETURN_ENUM0,miu=0,hid=26,sz=0x2000000,st=0xbc00000 CMA3=RETURN_ENUM2,miu=1,hid=27,sz=0x1400000,st=0x400000 CMA4=VDEC1,miu=1,hid=19,sz=0x7000000,st=0x1800000 CMA5=RETURN_ENUM,miu=1,hid=25,sz=0x2000000,st=0x8800000 BOOTLOGO_IN_MBOOT ENV_VAR_OFFSET=0x0 ENV_VAR_SIZE=0x10000 ENV=EMMC SECURITY=OFF
<338> AT Start UART Control-init_pram.AT_P=0

UART BUS OFF 1!!!