После перебоя питания постоянно моргал белый светодиод. и затем индикация ошибки. Ошибка 53
Подключил к терминалу (Hiperyerminal) ctrl+U
стерлась
Залил standbysw от другого.
Теперь моргает экран 2 раза и standby вечно. горит красный светодиод. реакции на пульт и кнопки нет.
Прошу выложить StandBySW_CTF69_84.0.0.0.upg
StandBySW_CTF69_84.0.0.0.hex!!!!!Добавлено (31/07/2012, 11:11:02)
---------------------------------------------
Service Modes, Error Codes, and Fault Finding Q548.1E LA 5. EN 33
2009-Apr-03
StandbySW_CFT69_x.x.x.x.zip Contains the Stand-by software in “upg”
and “hex” format.
- The “StandbySW_xxxxx_prod.upg” file
can be used to upgrade the Stand-by
software via USB.
- The “StandbySW_xxxxx.hex” file can be
used to upgrade the Stand-by software
via ComPair.
- The files
“StandbySW_xxxxx_exhex.hex” and
“StandbySW_xxxxx_dev.upg” may not be
used by Service technicians (only for
development purposes).