Процессор LGE2136 FLASH MX25L8005 EEPROM 24C256 MAIN EAX66453203(1.0) Матрица HC320DXN-ABNS4-5112 Подсветка DT1641AS для уменьшения тока подсветки нужно на 7 ноге RISET резистор R533 C 3.6 Ком ПОМЕНЯТЬ НА 25-27 Ком ТОК БУДЕТ (250ма-280ма)
Copy the LG_DTV folder to an empty low capacity USB Formatted Fat32. Wnen TV is ON inser USB and the Update Prompt will start automatically. This will fix corrupted NAND Firmware when TV Restarts with first installation error. In case the error still occurs after few days then flash the NAND skipping the bad blocks. I use RT809H for this. If error still persist then replace the NAND with new one and reflash.
Please don't forghet to press the Remont "Thank You" button on the firmware dowload page if all these files and instructions help you.
Драйвер подсветки DT1641AS (7pin R533 увеличить до 10 кОм, что бы уменьшить ток подсветки) Светики все менять, обсыпается люминофор, изображение синеет.
Hi everyone, This is my first very first upload to here. I read this firmware from a TV that was brought to me for repair error with backlite LED. After reading the firmware, I verified chip data and read bin file using different tools and result is OK. But not tested by flashing to another board.