[Mboot] ===== sw IR Config Register ===== [Mboot] ===== Attach IR Interrupt ====== Uboot Relocation: 152 MiB
eMMC HS400 5.1 200MHz eMMC 7.28 GB eMMC used life: 50~60% CID 0x003A0AE8 0xF1B60652 0x34465447 0x38000115 DRAM : 1024MB SAR5=ON In: serial Out: serial Err: serial Net: No ethernet found. MAC: 0x90: 0x98: 0x77: 0xE2:0xB7: 0xE5 [AT][MBoot][Driver Init][557] gpio[27] is 0 gpio[27] is 1 mmc change mount : tvconfig ** File not found model.info [ERROR] vfs_getsize:412: ext4filesize mmc fail No enough buffer or path fail(model.info) : [src/MsUtility.c] [loadscript] model.info not find !! Clean project_id env Writing to MMC(0)... 128 blocks written: OK 128 blocks written: OK done No need to update MPOOL partition. mmc change mount : tvconfig ** File not found model.info [ERROR] vfs_getsize:412: ext4filesize mmc fail No enough buffer or path fail(model.info) : [src/MsUtility.c] [loadscript] model.info not find !! Clean model_info env Writing to MMC(0)... 128 blocks written: OK 128 blocks written: OK done Try virtual ab bootloader_control... 0:MCP_N_D3_2133_8G_4x 1:MCP_N_D3_2133_0G_4x DRAM Channel 0 Size = [2048MB] Try virtual ab bootloader_control...
Changelist: 24543697 ============= set bootargs =============== Hit any key to stop autoboot: 0 enable dont overwrite function AC on
Upgrade Version: 2.0
Writing to MMC(0)... 128 blocks written: OK 128 blocks written: OK done Check USB port[0]: [USB] config miu select [F0] [EF] [EF] ][EF] [USB] enable miu lower bound address subtraction Error, couldn't init Lowlevel part Check USB port[1]: [USB] config miu select [F0] [EF] [EF] ][EF] [USB] enable miu lower bound address subtraction scanning bus for devices... New Device 0
[USB] interface[0] conf:1 value E0: 1 USB Device(s) found Found USB WIFI [MTK7663] in usb port 1 scanning bus for storage devices... 0 Storage Device(s) found Check USB port[2]: [USB] config miu select [F0] [EF] [EF] ][EF] [USB] enable miu lower bound address subtraction Error, couldn't init Lowlevel part FAIL : can not init usb!! Writing to MMC(0)... 128 blocks written: OK 128 blocks written: OK done mmc change mount : project_id Size of file "project_id.ini" from mmc device 0 partition project_id: 294 bytes Loading file "project_id.ini" at offset 0x0 from mmc device 0 partition project_id 294 bytes read [Mboot_IR] boot from dynamic ir fore uup u8KeyPad_KeyVal [0xFF] Try virtual ab bootloader_control... ENV_UPGRADE_COMPLETE =0 ENV_UPGRADE_MODE =null 1 blocks written: OK androidboot boot reason =reboot [QHB] PowerOnMode = 255, u4BootCtrl = 0x3, fgStateOn = 1 [QHB] prepare to CLEAR QHB [QHB] not quiescent boot. AC on Writing to MMC(0)... 128 blocks written: OK 128 blocks written: OK done Function = UtopiaOpen, Line = 313, UtopiaOpen[MODULE_HDMIEARC] strange failed having MODULE_CEC having MODULE_AESDMA having MODULE_XC having MODULE_NJPEG_EX having MODULE_DSCMB having MODULE_MIU having MODULE_GFX having MODULE_GOP having MODULE_PNL having MODULE_CPU having MODULE_SYS having MODULE_BDMA [Utopia][HDMIRX]: [MDrv_EARC_Get_ChipCapability, 7730]No instance existed, UtopiaOpen pulHDMIEARCInst failed [Utopia][AUDIO]: [_MApi_AUDIO_Initialize] AUDIO Driver Version : 11.12.16 [Utopia][[AUDIO][FATAL]]: REE On-board Version[0x000000] Mismatch!!!!!!! [Utopia][[AUDIO][ERROR]]: _MApi_AUDIO_SetOutConnectivity() : Audio system is not ready yet, please try again later [Utopia][[AUDIO][ERROR]]: [HAL_AUDIO_Enable_DSP_Intcb][27388] KKHH5 enable audio dsp to Arm interrupt 0!! [AT][MB][audio_preinit][3263] [QHB] normal boot mode Active Standby Mode FALSE =====
MsDrv_PNL_Init:Bypass SetDivison [Utopia][PNL]: [_MAPI_PNL_SetMFTMode]set default MFT at LPLL_Type=1 mi OLED support = 0 [MApi_XC_MLG_GetStatus, 2891]No instance existed, please get an instance by calling MApi_XC_Init() first [msReadEfuse][2929]u32Result=tx, after mask u32Result=tx [AT][MB][panel_pre_init][3321] -usb_stop(USB_PORT0) -usb_stop(USB_PORT1) -usb_stop(USB_PORT2)
###### Android Verify Boot 2.0 ######
[init_std] OPTEE version is 3 ubootRpmbReadRequest ubootRpmbVerifyReadResponse ubootRpmbReadRequest ubootRpmbVerifyReadResponse Try virtual ab bootloader_control...
[AT][MB][bootlogo begin][3663] [AT][MB][JPD Decode][3687] [showLogo] GOP Boot Logo Index 2 [MApi_XC_GetMirrorModeTypeEx, 1746]No instance existed, please get an instance by calling MApi_XC_Init() first [MApi_XC_GetStatus,14479]No instance existed, please get an instance by calling MApi_XC_Init() first [Utopia][GOP DRV]: Not support 2G palette!'[Utopia][GOP DRV]: [MDrv_GOP_GWIN_SetMux] not support gop3 in this chip version!![MApi_XC_GetStatus,14479]No instance existed, please get an instance by calling MApi_XC_Init() first [AT][MB][Show Logo][3765] Boot state is: Green !
readKL_dtb load AB partition boot_b boot_b image header version: 2
emmc_load_dtbo load AB partition dtbo_b ## emmc_load_dtbo: Load dtbo image from partition: dtbo_b ## Load dtbo image done, image size: 1467 Byte ! [QHB] normal boot mode Active Standby Mode FALSE ===== [QHB] normal boot mode Active Standby Mode FALSE ===== *****Amplifier_Init**** MApi_SWI2C_ReadBytes FAIL!! [QHB] normal boot mode Active Standby Mode FALSE ===== Headphone Detected Mute MAIN_SPEAKER !! [AT][MB][Play Melody][3990] [AT][MBoot][Boot Nuttx][3992] Kernel command line: quiet no_autorun_log=1 loglevel=1 dbg_mutex=0 androidboot.boot_devices=mstar_mci.0 buildvariant=user ANDROID HEADER V2 Getting the dtb of index: 0 ... OK -usb_stop(USB_PORT0) -usb_stop(USB_PORT1) -usb_stop(USB_PORT2) Loading Kernel Image ... OK Applying the overlay fdt of index: 0 ... OK ## boot_ufdt_overlay: Merge DTBO to main DTB done, takes 0.009 ms Loading Device Tree to 284D0000, end 284D9A98 ... OK [AT][MB][start kr][4070]
Starting kernel ...
[ERROR] _get_new_map_format_from_env:529: get MI_KERNEL_POOL3_ADR fail [ERROR] _get_new_map_format_from_env:529: get MI_KERNEL_POOL4_ADR fail [ 0.000000] Function = void dma_contiguous_reserve(phys_addr_t), Line = 578, set pool_id: 30 as a FAKEMEM CMA HEAP [ 0.000000] [ 0.000000] Function = void memory_present(int, unsigned long, unsigned long), go handling FAKEMEM mem_section 0x60000 to 0x80000, @ section 3 [ 0.000000] Function = void free_area_init_core(struct pglist_data *), Line = 7196, origin init from 0x20200 to 0x40600 [ 0.000000] Function = void free_area_init_core(struct pglist_data *), Line = 7196, origin init from 0x0 to 0x0 [ 0.000000] Function = void free_area_init_core(struct pglist_data *), Line = 7196, origin init from 0x40600 to 0x5B200 [ 0.000000] Function = void free_area_init_core(struct pglist_data *), Line = 7196, origin init from 0x0 to 0x0 [ 0.000000] [ 0.000000] [ 0.000000] Function = void free_area_init_core(struct pglist_data *), fakemem __init_single_pfn 0x60000 to 0x80000 [RAMLOG] tee_entry_get_ramlog_config 349
[RAMLOG] Chip ID: 4c aa 5a c3 6c ba 15 fa
_check_ramlog_binary Ramlog AUTHEN fail
[ 1.048069] ==RTC== MDrv_RTC_Init, 86 [ 2.519081] reboot: Restarting system with command 'bootloader' from init 1 1 UART_115200
[Mboot] ===== sw IR Config Register ===== [Mboot] ===== Attach IR Interrupt ====== Uboot Relocation: 152 MiB
eMMC HS400 5.1 200MHz eMMC 7.28 GB eMMC used life: 50~60% CID 0x003A0AE8 0xF1B60652 0x34465447 0x38000115 DRAM : 1024MB SAR5=ON In: serial Out: serial Err: serial Net: No ethernet found. MAC: 0x90: 0x98: 0x77: 0xE2:0xB7: 0xE5 [AT][MBoot][Driver Init][557] gpio[27] is 0 gpio[27] is 1 mmc change mount : tvconfig ** File not found model.info [ERROR] vfs_getsize:412: ext4filesize mmc fail No enough buffer or path fail(model.info) : [src/MsUtility.c] [loadscript] model.info not find !! Clean project_id env Writing to MMC(0)... 128 blocks written: OK 128 blocks written: OK done No need to update MPOOL partition. mmc change mount : tvconfig ** File not found model.info [ERROR] vfs_getsize:412: ext4filesize mmc fail No enough buffer or path fail(model.info) : [src/MsUtility.c] [loadscript] model.info not find !! Clean model_info env Writing to MMC(0)... 128 blocks written: OK 128 blocks written: OK done Try virtual ab bootloader_control... 0:MCP_N_D3_2133_8G_4x 1:MCP_N_D3_2133_0G_4x DRAM Channel 0 Size = [2048MB] Try virtual ab bootloader_control...
Changelist: 24543697 ============= set bootargs =============== Hit any key to stop autoboot: 0 enable dont overwrite function AC on
Upgrade Version: 2.0
Writing to MMC(0)... 128 blocks written: OK 128 blocks written: OK done Check USB port[0]: [USB] config miu select [F0] [EF] [EF] ][EF] [USB] enable miu lower bound address subtraction Error, couldn't init Lowlevel part Check USB port[1]: [USB] config miu select [F0] [EF] [EF] ][EF] [USB] enable miu lower bound address subtraction scanning bus for devices... New Device 0
[USB] interface[0] conf:1 value E0: 1 USB Device(s) found Found USB WIFI [MTK7663] in usb port 1 scanning bus for storage devices... 0 Storage Device(s) found Check USB port[2]: [USB] config miu select [F0] [EF] [EF] ][EF] [USB] enable miu lower bound address subtraction Error, couldn't init Lowlevel part FAIL : can not init usb!! Writing to MMC(0)... 128 blocks written: OK 128 blocks written: OK done mmc change mount : project_id Size of file "project_id.ini" from mmc device 0 partition project_id: 294 bytes Loading file "project_id.ini" at offset 0x0 from mmc device 0 partition project_id 294 bytes read [Mboot_IR] boot from dynamic ir fore uup u8KeyPad_KeyVal [0xFF] Try virtual ab bootloader_control... ENV_UPGRADE_COMPLETE =0 ENV_UPGRADE_MODE =null 1 blocks written: OK androidboot boot reason =reboot ==========Config Info========== [Info] EPCONTROL : EP0 [Info] EPBULKIN : EP1 [Info] EPBULKOUT : EP2 [Info] EPINTIN : EP3 [Info] EPISO : EP3 [Info] Device is working in High Speed Mode [Info] Data movement in DMA mode [Info] Event is generated by POLLING MTK Fastboot.. [USB] TV_usb_init (UTMI Init) [USB] Ver. mainline_20180823_v1.0 [USB] UTMI Base 1F207500 [USB] USBC Base 1F200E00 [USB] OTG Base 1F244000 [Info] MTK USB Fastboot Test fucntion Enter into the fastboot mode. EvnManufacturer:vestel EvnProduct:menlo EvnSerial:290182650073 SerDesc:290182650073 fastboot: processing commands ...
Добавлено (29.04.2026, 04:41:32) --------------------------------------------- Нашел прошивку в турецких сайтах,телевизор работает.
Файлы
Прошивки
Продажа
Литература
Статьи
Для просмотра сообщения Вы должны быть Участником форума. Для этого Вам необходимо 
Зарегистрировано всего