c:\>spipgm\SPIPGM\SPIPGMW \i
SPI FlashROM Programmer 1.9c © 2008-2011 by Martin Rehak;
rayer@seznam.cz Compiled by GCC 4.4.0 at 23:20:41, Mar 22 2011
(Win9x/NT/2K/XP compatability)
SPI connected to LPT port at I/O base address: 378h, SCK pulse width: t+0us
FlashROM JEDEC ID, type: DFFFFFh
Unknown manufacturer
Status = FFh (SRP, RES, TB , BP2, BP1, BP0, WEL, BSY)
1 1 1 1 1 1 1 1
Status register is protected, you will need to set WP# high
c:\>spipgm\SPIPGM\SPIPGMW \e
SPI FlashROM Programmer 1.9c © 2008-2011 by Martin Rehak;
rayer@seznam.cz Compiled by GCC 4.4.0 at 23:20:41, Mar 22 2011
(Win9x/NT/2K/XP compatability)
SPI connected to LPT port at I/O base address: 378h, SCK pulse width: t+0us
FlashROM JEDEC ID, type: C22016h
Macronix MX25L3205 (4MB)
Status = 02h, WE bit is enabled
Please wait... done.
c:\>spipgm\SPIPGM\SPIPGMW \i
SPI FlashROM Programmer 1.9c © 2008-2011 by Martin Rehak;
rayer@seznam.cz Compiled by GCC 4.4.0 at 23:20:41, Mar 22 2011
(Win9x/NT/2K/XP compatability)
SPI connected to LPT port at I/O base address: 378h, SCK pulse width: t+0us
FlashROM JEDEC ID, type: C22016h
Macronix MX25L3205 (4MB)
Status = 00h (SRP, RES, TB , BP2, BP1, BP0, WEL, BSY)
0 0 0 0 0 0 0 0
Файлы
Прошивки
Продажа
Литература
Статьи
Для просмотра сообщения Вы должны быть Участником форума. Для этого Вам необходимо 
Зарегистрировано всего