Hello to all the participants of the forum, I took a Samsung TV set aside, initially the TV lends itself off with a flashing standby LED, I notice that one two LEDs on the T-con board briefly turns on and returns off. From the LVDS connector disconnect the pins of the signal (CKV1-CKV2-CKV3-CKVB1-CKVB2-CKVB3) that arrives at the Tcon board TPTS-2S E88441 connected to the TVS diodes and COF driver, after this operation the TV switches on with audio and image present. The image shows a black vertical stripe and some horizontal stripes, I replaced T-CON BN41-02229A, but the problem remains. I suspect the failure of the driver COF DB6896A-FL23X, as this heats up more than the others. Can anyone help me with the repair? is there any solution? or to replace the COF manually? Thank you all.
Файлы
Прошивки
Продажа
Литература
Статьи
Для просмотра сообщения Вы должны быть Участником форума. Для этого Вам необходимо 
Зарегистрировано всего