System startup

version:U-Boot 2018.07 (Jun 09 2020 - 17:12:50 +0800)

TLB ADDR:0xe000000
Build Date: Jun 9 2020, 17:13:49
CPU: Hi3751v350
Boot Media: eMMC

gd:10bfff50,DRAM addr:0x0,size:0x40000000
1 GiB
WARNING: Caches not enabled
board_init,41
MMC: hisi-sdhci: 0

EMMC/MMC/SD controller initialization.
current clock: 400000Hz, host timing: 0x0
current clock: 52000000Hz, host timing: 0x1
current clock: 120000000Hz, host timing: 0xa
MMC/SD Card:
MID: 0x15
Read Block: 512 Bytes
Write Block: 512 Bytes
Chip Size: 7456M Bytes (High Capacity)
Name: "8GTF4"
Chip Type: MMC
Version: 5.1
Speed: 120000000Hz
Bus Width: 8bit
Mode: HS400ES
Loading Environment from MMC... OK

DRAM: 1G
There is no env mem_1G!!!
Net: up
Warning: up (eth0) using random MAC address - 26:95:58:ab:a5:1a

The DDR memory layout:
page table: 0x0e000000 - 0x0e400000 4 MiB
stack: 0x0e400000 - 0x0e800000 4 MiB
irq stack: 0x0eaefecc - 0x0ebefecc 1 MiB
.text: 0x10c00000 - 0x10c471a4 284.4 KiB
data: 0x10c471a4 - 0x10cd4050 563.7 KiB
init_sequence_r done!

HDMI HPD pos:f
HDMI CEC Ctrl HPD:1
SDK_VERSION: [HiDPTAndroidV600R001C00SPC050_20191108]
CUSTOM func[hi_drv_custom_board_init] line[96] :--board name is:HI3751V350_DEMO_BOARD, power on optimize: TRUE
Now start cvte control on fastboot!

<CVET-AT> CvteAtResetEnv

<CVET-AT> bootargslen=55
same as mem=512M console=ttyAMA0,115200 console=ttyMTD,blackbox
<CVET-AT> CvteInitAtParamAllEnv
Saving Environment to MMC... Writing to MMC(0)... OK
Now powerFlag(0xf840951c)=0x0, system AC on
(Re)start USB...
hiusb usb phy init
hiusb phy0_rg_pll_lock:1
hiusb read otp trim: 0xf
USB EHCI 1.00
scanning bus 0 for devices... 2 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
hiusb usb phy release
Now no usb detect!
<Data> CusATModeFlag_Get
HI_Flash_Open partion factorydata error
<CVTE-AT> FacFlag4Read from factorydata error!!!
<CVTE-AT> ---- To Restore SElinux ----
same as mem=512M console=ttyAMA0,115200 console=ttyMTD,blackbox
<CVTE-AT> enter DoCheckCvteAtBootMode
<CVTE-AT> [CvteBootAgingLoop][LINE:143] Enter Boot AgingMode isAT_B_Mode:0

<CVET-AT> IsCvteBoardAgingModeB2 init_at_param.AT_B_2=0
<Data> CvteATFlag_Get type=15
HI_Flash_Open partion factorydata error
<CVTE-AT> FacFlag4Read from factorydata error!!!
<CVTE-AT> IsCvteAgingMode AT_AingMode = 0
<Data> CvteATFlag_Get type=9
HI_Flash_Open partion factorydata error
<CVTE-AT> FacFlag4Read from factorydata error!!!isCvteLabAging at_t = 0hi_flash_open partion deviceinfo error
start_slaveboot Failed, Please Confirm Config