Put the firmware into U disk Root directory, Insert the USB disk to TV USB port, There is 2 way for upgrade
1. Go to Factory Mode(menu + 1201), upgrade - USB upgrade, It will restart and upgrade.
2. Plug off the power cable , press and hold the Power touch button on the glass, Plug in the power cable. It will upgrade.
The LED light will flashing during upgrading don't power off the cable. When the upgrading is finished, the LED light will stop flashing.（It require a touch key board)
If the screen is reversed after upgrade firmware, please ask AVEL for another version firmware. It can't be changed in factory mode.
Adjust the brightness to Maximum
Go to Factory Mode(menu + 1201), Picture -- Picture Mode -- Backlight -- 0 or 100 for maximum (The default is 100 but sometimes 0 is maximum so it depends on different panel case by case)
Большой 65" , очень тяжелый наружный телевизор-монитор. Поступил на ремонт с дефектом " не включается". Перезалил прошивку в другую микросхему- заработал.
This is the source code to the almost lost to time Award bios. its simplicity of it should make it interesting to view for tinkerers and people who have a couple hours to do.
I do not recommend trying to get it running on anything other than a VM that can semi handle firmware like QEMU or BOCHS. Most motherboards today have secure lock checks and things that would make flashing this impossible. But its really useful for people
AWARD IN ALOT OF WAYS HAS BETTER COMP-ABILITY WITH OLDER WINDOWS VERSIONS IN QEMU THAN SEABIOS. so I hope you find use with this or have fun tinkering with it.
Файлы
Прошивки
Продажа
Литература
Статьи
