In caz ca TV tot nu porneste dupa scrierea chipului U3 W25X40 se scrie chipul U2 24C32 cu continutul chipului U3 W25X40 si se asteapta cateva secunde pana cand TV va porni singur afisand meniul de configurare initiala.
If the TV still does not start after writing the U3 W25X40 chip, write the U2 24C32 chip with the contents of the U3 W25X40 chip and wait a few seconds until the TV starts by itself displaying the initial configuration menu.
This firmware works on Europe with DVB-C and Analog, all programs with sound. You can read and write the chip with RT809H with VGA cable and select Auto ISP To write the chip with this method the board needs to have an MSTAR chip and the TV to be on to bypass the write protection. To enter service menu press Source 3138. Remote control 91081, 92383, 94849 (Longer) and 19SM48CD.
Прошивка с рабочего аппарата. Изначальная проблема включается звук есть, но серый экран с подсветкой без изображения. Причина на плате матрицы пробитый керамический конденсатор 300-500ом по 26 выводу (10V) SM4186, отсутствовало напряжение 1.8V и VONE (33v). W25Q64JV на основной плате, считывалась легко любой программой, но вот стереть и прошить микросхему удалось только AsProgrammer_2.1.0.13 с включенной галочкой OFF-Protect выбирая W25Q64BV.