Looking for firmware dump of monitor LG Flatron 27EA53VQ-P with board EAX65148301 1.1, chassis LM13E Model No: 27EA53VA Main CPU: NT6877 Panel: LM270WF5
With original firmware display starts normally if it's not connected to source, showing the "No input signal" on display with the correct colors, but none of the buttons are responding (menu, auto adjust etc). When source is connected to HDMI i get wrong colors (almost black and white only), corrupted OSD and again the buttons are not responding.
Attached backup of my firmware. Note that my S/N is 301NDEZJP180 but i notice with hex editor at offset 0xF371, 0xFB71, 0x1F371, 0x1FB71, 0x2F371, 0x3F371 that the S/N is wrong (341NDEZJP580) so this firmware is definitely corrupted.
Файлы
Прошивки
Продажа
Литература
Статьи
Зарегистрировано всего