Switch to Earphone UART
SEC

Switch to Micom UART

=================================
onboot (Feb 25 2011 - 16:08:03)
release ver : 1002 - RELEASE
etc :
=================================

Onboot X6 Sync mode
LCD FastLogo Run...
Loading Kernel....
load kernel start, size : 131072 + 3538944 byte
Jump Kernel....

auth success by h/w sha1 UART1 is used to debug mode.
[SELP] preset_lpj manual setting 894976
================================================================================
SAMSUNG Mstar Kernel
Version : 1003_192 RELEASE
================================================================================
init started: VDLinux-BusyBox v1.14.3-VD Linux VDLinux.1.2.1.x (2011-01-18 11:04 :20 KST)
starting pid 26, tty '': '/etc/rc.local'
/etc/rc.local start!!!!
=====================================================
ROOTFS VERSION : "Mstar-X6 1007" KERNEL MODULE VERSION : "1003_192 RELEASE"
===========##### send signal from USER, SIG : 0, init(1)->???(26) sys_kill
==========================================
mount: mounting devpts on /dev/pts failed: No such device
starting pid 37, tty '': '/bin/cttyhack -/bin/sh'
/etc/profile start!!
====================================================================
[SELP] fsr module load!!(1003_192 RELEASE preempt mod_unload MIPS32_R2 32BIT )
====================================================================
====================================================================
[SELP] fsr_stl module load!!(1003_192 RELEASE preempt mod_unload MIPS32_R2 32BIT )
====================================================================
====================================================================
[SELP] rfs_glue module load!!(1003_192 RELEASE preempt mod_unload MIPS32_R2 32BI T )
====================================================================
====================================================================
[SELP] rfs_fat module load!!(1003_192 RELEASE preempt mod_unload MIPS32_R2 32BIT )
====================================================================
"Mstar-X6 1007" KERNEL MODULE VERSION : "1003_192 RELEASE"
+ otp lock check
OTP INFO : First Block OTP is Locked.
OTP INFO : OTP Block is not Locked.
mount mtd_rwarea
mount mtd_exe
mount mtd_rocommon
mount mtd_rocommons
mount: mounting /dev/stl1/37 on /mtd_rocommons failed: No such device or address
== Start exeDSP ==
/mtd_exe/rc.local start !!!!!
====================================================================
[SELP] samsung_mstar module load!!(1003_192 RELEASE preempt mod_unload MIPS32_R2 32BIT )
====================================================================
Run FastLogo...
====================================================================
[SELP] FastLogo module load!!(1003_192 RELEASE preempt mod_unload MIPS32_R2 32BI T )
====================================================================
mallopt(M_MMAP_THRESHOLD) success!
[FASTBOOT] Main thread id: 56
##### System Execution!!! ##### [1610]
Running Parallel FASTBOOT
MMAP: E_MMAP_256MB_256MB
startaddr = 4630000, alignment = 0, size= 4e0000
startaddr = 7890000, alignment = 0, size= 4000
startaddr = 78b4000, alignment = 0, size= 7800000
startaddr = f0b4000, alignment = 0, size= 10000
startaddr = f0c4000, alignment = 0, size= 6a8000
startaddr = f76d400, alignment = 400, size= 760e20
startaddr = 5310000, alignment = 0, size= 380000
startaddr = 20000000, alignment = 0, size= 2800000
startaddr = 22800000, alignment = 0, size= 1400000
startaddr = 23c00000, alignment _mod_sys_open.236 ioctl
= 0, size= 200000
---------------------------------------------
SdCommon_GpioInit()
---------------------------------------------
DRAM SIZE 512M
SDAL - 05.35.00.00
Init PWM2
Init PWM4
GOP FB:22800000
GOP2 FB:78b4000
the length of the thread name exceeds 15, it will be truncated to_mod_sys_open.2 36 ioctl
15 chars
------------------[SdCommon_IicInit][969]
[HAL_DSCMB_SetBank][82] Set bank 0x2b13e000
u32PhyBufAddr = 04640100, u32PhyBufSize = 000cff00
u32VirBufAddr = 2b1ce100, u32VirBufSize =_mod_sys_open.236 ioctl
000cff00

_mod_sys_release.243 ioctl
NonPmBase = 0x2b13e000, NonPmBankSize = 0x80000

PmBase = 0x2aebe000, PmBankSize = 0x280000

CODE_ADDR_NCACHE = 0x2b1be000, CODE_ADDR = 0x4630000

pm_aes_fw:
Thrd(720098512) SEND OUT: ac00
Thrd(720098512) RESPONSE: 7468
pTest: 00 00 64 04

SDAL version : SDAL - 05.35.00.00

>>> TDBuilder::Build start
[SdMisc_DisplayResolution 591]
------------------[SdCommon_IicInit][969]
[LightSensorMonitor::LightSensorMonitor] m_poLightSensor = [0x06f96d18]
[LightSensorMonitor::LightSensorMonitor] m_poLightSensor = [0x06f97790]
<<< TDBuilder::Build End
MApi_PVR_Init_AESDMA
MApi_PVR_Init_AESDMA
ResetSystemConfig tuner
############## Find Factory_Part1.dat File in mtd_exe ##################
############## Find Factory_Part2.dat File in mtd_exe ##################

FixedId : Nvram[41] vs File[41]

WBId : Nvram[600] vs File[600]

WB ADC(Part1) Id : Nvram[40] vs File[40]

EER Basic Id : Nvram[52] vs File[52]

EERId Custom : Nvram[666] vs File[666]

FACId : Nvram[49] vs File[49]
LightSensorMonitor Creat...Start Brightness Step = [20]
[LightSensorMonitor] Start !
ID_SELECT_LCD PDP:LCD,GPIO_LCD_PDP SEL:LCD
Called...withDB
=========4 Tuner Selected !!!
MApi_DMX_GetLibVer 00318138

>>[ERR:TDsNTP7411AudioAmp.cpp] t_WriteReg():1276 ▒¢▒ Addr = 0x02, Data = 0x01 Write fails
[ShareSiBT2C_Write] Error!!!
[ShareSiBT2C_Write] Error!!!
[ShareSiBT2C_Write] Error!!!
▒ڡ▒ Check Factory, Num of Amp is 1.
DSPBinBaseAddress = 0x0
DSPMadBaseBufferAdr = 0xf16c000
[ShareSiBT2C_Write] Error!!!
[ShareSiBT2C_Write] Error!!!
[ShareSiBT2C_Write] Error!!!
[ShareSiBT2C_Write] Error!!!
[ShareSiBT2C_Write] Error!!!
[ShareSiBT2C_Write] Error!!!
[ShareSiBT2C_Write] Error!!!
HAL_AUDIO_SetPowerOn(1)
======> Audio R2 Base : f16c000
[ShareSiBT2C_Write] Error!!!
[ShareSiBT2C_Write] Error!!!
MDrv_WBLE_EnableBLE(): invoking Hal_WBLE_set_ble()
Checking PQ bin in /mtd_rwarea/...
/mtd_rwarea/X6_Main.bin is not exist!!
Checking PQ bin in /mtd_exe/pqbin/...
/mtd_exe/pqbin/X6_Main.bin is not exist!!
Checking PQ bin in /mnt/pqbin/...
/mnt/pqbin/X6_Main.bin is not exist!!
!!!!!PQ bin is not exist, use C files!!!!!
[ShareSiBT2C_Write] Error!!!
[ShareSiBT2C_Write] Error!!!
[ShareSiBT2C_Write] Error!!!

=======================================
[PQ File] version info:
X6_Main_0000000000000216 ver
X6_Sub_0000000000000018 ver
X6_Main_Ex_0000000000000012 ver
X6_Sub_Ex_0000000000000003 ver
=======================================
[ShareSiBT2C_Write] Error!!!
[ShareSiBT2C_Write] Error!!!
[ShareSiBT2C_Write] Error!!!
[ShareSiBT2C_Write] Error!!!
[ShareSiBT2C_Write] Error!!!
[ShareSiBT2C_Write] Error!!!
[ShareSiBT2C_Write] Error!!!
Data Transferred to Store...[384]!!!
Data Transferred to ScreenObject...[384]!!!
Crop win invalid!!
Disp win invalid!!
MApi_XC_SetWindow failed because of InitData wrong, please update header file and compile again
[TDaSystem::PrimePivotModeConfig] PivotConfig Size [1920 * 1080], Mode [3]
DSP code loaded successfully
[TDaScaler][Create]CREATE_TYPE_STEP_FHD !!!
[TDaScaler][Create]CREATE_TYPE_STEP_SD !!!

>>[ERR:RectangleHelper.cpp] Create():2033 [eResolution Create Type=0]
>>[ERR:TDcGraphicScaler.cpp] t_GraphicGet():1221 [G-Main]Read fail Drv Data
[TDaScaler][Create]CREATE_TYPE_STEP_FHD !!!
[TDaScaler][Create]CREATE_TYPE_STEP_SD !!!

>>[ERR:RectangleHelper.cpp] Create():2033 [eResolution Create Type=0] [TDaScaler][Create]CREATE_TYPE_STEP_FHD !!!
[TDaScaler][Create]CREATE_TYPE_STEP_SD !!!

>>[ERR:RectangleHelper.cpp] Create():2033 [eResolution Create Type=0] [TDaScaler][Create]CREATE_TYPE_STEP_FHD !!!
[TDaScaler][Create]CREATE_TYPE_STEP_SD !!!

>>[ERR:RectangleHelper.cpp] Create():2033 [eResolution Create Type=0] [PVRSSFactory::Build(),LINE:82 ]

>>[ERR:TDsSiBTunerT2C.cpp] t_InitTCTuner():1233 Si2173_Initialize
[ShareSiBT2C_Write] Error!!!

~~[Sub System Error] CloneUSB.cpp:t_RestoreNvramFromFile():379 /mtd_rwarea/PLDAT_Clone File open error !

~~[Sub System Error] CloneUSB.cpp:t_RestoreNvramFromFile():379 /mtd_rwarea/SSDAT_Clone File open error !

~~[Sub System Error] CloneUSB.cpp:t_RestoreFactoryFromFile():549 /mtd_rwarea/FADAT_Clone File open error !

~~[Sub System Error] CloneUSB.cpp:t_SafeFileRename():603 File /mtd_rwarea/PLDAT_Clone do not exist!!

~~[Sub System Error] CloneUSB.cpp:t_SafeFileRename():603 File /mtd_rwarea/SSDAT_Clone do not exist!!

~~[Sub System Error] CloneUSB.cpp:t_SafeFileRename():603 File /mtd_rwarea/FastLogoInfo_Clone do not exist!!

~~[Sub System Error] CloneUSB.cpp:t_SafeFileRename():603 File /mtd_rwarea/FADAT_Clone do not exist!!

=== kochien SRS_SetTSHD ===

=== invalid auto volume mode ===
the length of the thread name exceeds 15, it will be truncated to 15 chars
SdMisc_HShaking: 0
Param_u16Fmodulation = 4
DDR_u16Deviation = 10
[ Fast Boot ] [ Panel Control Type : 3 ]
SetKeySensitivity = 36n
>>[ERR:TDiVideoEnhancer.cpp] SetPictureInformation():177 Null Fuction Call !!!Must Check Implementation Code...
====== Send Jack ID Command to SubMicom ! =====
Get Boot Status ACK! status : 0[0x0]

set prescale DSP type error!! ff

set prescale DSP type error!! ff

set prescale DSP type error!! ff

set prescale DSP type error!! ff
Get MasterPowerR_mod_sys_open.236 ioctl
eset ACK! status : 1[0x0]
Validation 0
PCMCIA open /dev/system success >> SYS_fd= 14
Has Chmap
[ Fast Boot ] [ Panel Control Type : 2 ]

==================================================
---------- GLOBAL INITIALIZATION START [3620]----
==================================================

====================================================================
[SELP] FastLogo module unload!!(1003_192 RELEASE preempt mod_unload MIPS32_R2 32BIT )
[SdCI_Set][BYPASS][2]
[SS][EventSender::InstallFreezeCallback(),LINE:111 ]

SdVideo_Get()#1245: g_IPanel.Width(), g_IPanel.Height(): (1920, 1080)
Initial Value ,No Input Source
Initial Value ,No Input Source ====================================================================

>>> t_PlayMelody 0
============ CHECK FAST BOOT Exception [3690]======
Initial Value ,No Input Source
==== HDMI [SRC num :1], [ID: 0x47], [HP STATE: 0xf]
[PrimeShare] t_SetSPDIF_PCM_Level : eSrc 0, DDCompMode 1 (RFmode:1), Factory value 1, SDAL set value 0
|||||||||||||||||| PWM Enable ..!!! ||||||||||||||||||
|||||||||||||||||| Inverter On ..!!! ||||||||||||||||||

>>[ERR:TDiVideoEnhancer.cpp] SetPictureInformation():177 Null Fuction Call !!!Must Check Implementation Code...
[ Fast Boot ] [ Panel Control Type : 4 ]

=== SdMisc_SetTheaterSndHD ok ===

=== kochien SRS_SetTSHD ===

=== invalid auto volume mode ===
end of Melody for on

=== SdMisc_SetTheaterSndHD ok ===

=== SdMisc_SetTheaterSndHD ok ===

>>[ERR:TDsPrimeAudioProcessor.cpp] Connect():1084 !!!error : eSrc = [0x0] or eWindowType = [0xffffffff]

============ CHECK FAST BOOT Exception [4160]======
Product version : T-MST5DEUC-1019.0

Alreay changed New MAC address, so that's ok

## Core Software Platform ™ 1.1 : DTP-SP-0085 (RELEASE)
Copyright © SAMSUNG Electronics Co.,Ltd.

CSP No sched_yield()
TCMW::Initialize() start

[PVRSSFactory::getPVRSSRecorder(),LINE:199 ] " DriverType = [0] "
[PVRSSFactory::getPVRSSRecorder(),LINE:200 ] " RecorderNumber = [0] , MaxRecorderNumber = [2] "
[PVRSSFactory::getPVRSSRecorder(),LINE:214 ] " System RecorderDriver is Created"
[PVRSSFactory::getPVRSSRecorder(),LINE:228 ] " PVRSSFactory will create m_recorder[0]"

[SS] [ERR][RecordMonitor.cpp:stopRecordReadyAlram():173] readyAlarm is not created.
[SS][ #-1 ][CRecordController::changeState(),LINE:371 ] " State Change : [NULL] ---> [RecorderNoneState] "

[SS] [ERR][RecordMonitor.cpp:stopRecordReadyAlram():173] readyAlarm is not created.
[PVRSSFactory::getPVRSSRecorder(),LINE:232 ] " PVRSSFactory will return m_recorder[0]"
[PVRSSFactory::getPVRSSPlayer(),LINE:247 ] " DriverType = [0] "
[PVRSSFactory::getPVRSSPlayer(),LINE:248 ] " PlayerNumber = [0], MaxPlayerNumber=[1] "
[PVRSSFactory::getPVRSSPlayer(),LINE:261 ] " System PlayerDriver is Created "
CTrickPlayerManager::GetTrickPlayerManager() m_pTrickPlayerManager == NULL)
CTrickPlayerManager::GetTrickPlayerManager() GetTrickPlayer[0] == NULL)
[PVRSSFactory::getPVRSSPlayer(),LINE:274 ] " PVRSSFactory will create m_player[0]"
[SS] [PLY] [ PVRSSPlayer.cpp::CPVRSSPlayer(), LINE:42 ]
[PVRSSFactory::getPVRSSPlayer(),LINE:277 ] " PVRSSFactory will return m_player[0]"
ProfileManager::t_CompareMagicKey() line[567] Offset 0 Size 4]
ProfileManager::t_CompareMagicKey() line[575] CRC: 82251018, magicKey: 82251018ProfileManager::Init() line[75] Mark 1080
[SdCI_Set][BYPASS][2]
Profile AgentID Offset Size
[DEFAULT/Info] 0 : 43 17 0 2c
[DEFAULT/Info] 1 : Data:
[DEFAULT/Info] 2 : 0 0 0 0 0 0 49 3 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[DEFAULT/Info] 3 : ff ff ff ff ff ff ff ff 0 b7 9 7
[DEFAULT/Info] 4 : -----------------------------------------------------------------

[DEFAULT/Info] 5 : 43 19 2c c
[DEFAULT/Info] 6 : Data:
[DEFAULT/Info] 7 : 0 0 0 0 ff ff ff ff 1 0 0 0
[DEFAULT/Info] 8 : -----------------------------------------------------------------

[DEFAULT/Info] 9 : 43 21 38 10
[DEFAULT/Info] 10 : Data:
[DEFAULT/Info] 11 : ff ff ff ff ff ff ff ff ff ff f7 6 ff ff ff ff
[DEFAULT/Info] 12 : -----------------------------------------------------------------

[DEFAULT/Info] 13 : 43 23 48 24
[DEFAULT/Info] 14 : Data:
[DEFAULT/Info] 15 : 0 0 0 0 0 0 0 0 0 0 0 0 12 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[DEFAULT/Info] 16 : 0 0 0 0
[DEFAULT/Info] 17 : -----------------------------------------------------------------

[DEFAULT/Info] 18 : 43 26 6c 18
[DEFAULT/Info] 19 : Data:
[DEFAULT/Info] 20 : ff ff ff ff 0 0 0 0 ff ff ff ff 0 0 0 0 ff ff ff ff 0 0 0 0
[DEFAULT/Info] 21 : -----------------------------------------------------------------

[DEFAULT/Info] 22 : ####Reset TCTvManagerBase::Create####

[DEFAULT/Info] 23 : ####Reset Channel Magic Key ! old = 1101004 new = 1101004 !!!####

[DEFAULT/Debugging] 24 : FlagHospitalMode[0]
[M_TMS/Fatal] 25 : TCNameMemory::Load() => Couldn't create file /mtd_chmap/DefaultAuthority

[M_TMS/Fatal] 26 : TCBouquetMemory::Load() => Couldn't create file /mtd_chmap/Bouquets

[DEFAULT/Debugging] 27 : TCChSortModeDB::LoadSortMode Cannot Open File /mtd_chmap/ChSortMode

[DEFAULT/Debugging] 28 : FlagUseHotelMixedMap, factoryMapUse[0]
[DEFAULT/Debugging] 29 : FlagUseHotelMixedMap, hotelProductType[0]

>>[ERR:TDiDemodulator.cpp] GetModSwitchingTime():62 Null Fuction Call !!!Must Check Implementation Code...
[DEFAULT/Fatal] 30 : TCWindowInfoManager_DVB::t_ChangeCountry (WindowId:1 TvMode:0 Country:7,BroadCasterId :-1)
[DEFAULT/Fatal] 31 : TCWindowInfoManager_DVB::t_ChangeCountry (WindowId:6 TvMode:0 Country:7,BroadCasterId :-1)
[DEFAULT/Fatal] 32 : TCWindowInfoManager_DVB::t_ChangeCountry (WindowId:7 TvMode:0 Country:7,BroadCasterId :-1)
[DEFAULT/Fatal] 33 : TCWindowInfoManager_DVB::t_ChangeCountry (WindowId:2 TvMode:0 Country:7,BroadCasterId :-1)
[DEFAULT/Fatal] 34 : TCWindowInfoManager_DVB::t_ChangeCountry (WindowId:4 TvMode:0 Country:7,BroadCasterId :-1)
[DEFAULT/Fatal] 35 : TCWindowInfoManager_DVB::t_ChangeCountry (WindowId:9 TvMode:0 Country:7,BroadCasterId :-1)
[DEFAULT/Debugging] 36 : LSC Resource enabled! Network support : 2 (1 : Cable, 2 : WiFi Ext., 3: WiFi Int.
[SdCI_Set][BYPASS][2]
[DEFAULT/Debugging] 37 : [TCIMSUtil::AddInfoManager] Failed to add InfoManager to list.
[DEFAULT/Fatal] 38 : [t_FillChannelInfo] FoundChannel - retVal:1 3(3-0),1
[DEFAULT/Fatal] 39 : [t_InitChannel] CurrentChannel - 3(3-0),1
[DEFAULT/Fatal] 40 : [t_FillChannelInfo] FoundChannel - retVal:1 3(3-0),1
[DEFAULT/Fatal] 41 : [m_UpdateBootChannel] SetChannel - 3(3-0),1
[M_DSM_OC/Fatal] 42 : [TCObjManagerBase::Create] Country = 7

=== SdMisc_SetTheaterSndHD ok ===
[M_DSM_OC/Fatal] 43 : [TCObjManagerBase::Create] PROFILE MHEG

TCMW::Initialize() end
Shadow 2.5 (revision number: DTP-BP-Shadow-0214-Mstar-X6-DEU-08-Release) is being initialized.

[PLF][Platform:97] <INIT START>-- before create

====================
First GOP driver instance, flush GWIN HW
====================

[X6_Screen32.cpp:X6_Screen32:70] SCREEN0 width : 1280, height : 720, address: 31664040
[X6_Screen32.cpp:X6_Screen32:70] SCREEN1 width : 1920, height : 1080, address: 3c5ab040
[X6_Screen32.cpp:X6_Screen32:70] SCREEN2 width : 960, height : 540, address: 3cf8e480
[X6_Screen32.cpp:Enable:419] SCREEN0
[SdGfx_Mute:1176-TID(56)] screen(0) On(1)/Off(0) : 1
[X6_Screen32.cpp:Disable:429] SCREEN1
[SdGfx_Mute:1176-TID(56)] screen(1) On(1)/Off(0) : 0
[X6_Screen32.cpp:Disable:429] SCREEN2
[SdGfx_Mute:1176-TID(56)] screen(2) On(1)/Off(0) : 0
[PLF][Platform:129] <INIT END>-- after create
[PLF][IsEnabled:148] SCREEN0 (true)
[PLF][IsEnabled:148] SCREEN1 (false)
[PLF][IsEnabled:148] SCREEN2 (false)
0 (4294967295): Initialize Cubic Motion Profile v2.5.0214-05

[DTVInputService::t_Create] m_nKeyInputTime = 5680

[DEFAULT/Warning] 44 : Specified confliction type has already been set !!
[DEFAULT/Warning] 45 : Specified confliction type has already been set !!
[DEFAULT/Warning] 46 : Specified confliction type has already been set !!
[DEFAULT/Warning] 47 : Specified confliction type has already been set !!
[DEFAULT/Warning] 48 : Specified confliction type has already been set !!
[DEFAULT/Warning] 49 : Specified confliction type has already been set !!
[DEFAULT/Warning] 50 : Specified confliction type has already been set !!
Temp log : CPreAllocatedMemoryAllocator::initialize, m_pBuffer = 0X47108008
APP_INITIALIZE(); end

[DEFAULT/Debugging] 51 : MW Initilize Completed

==================================================
----------- GLOBAL INITIALIZATION END [6510]------
==================================================

[DEFAULT/Debugging] 52 : WaitForFastBoot End
[DEFAULT/Debugging] 53 : TCBootingChannelInfo::Set is called...[BootReason : -1][RealBootReason : -1]
TPCTv::Power, ######## 3 ######## Param : 0
TPCTv::Power, Return Value Check : 1
==================================================
------------------- NORMAL MODE ------------------
==================================================
[PrimeShare] t_GetAudioOutPutGain : cRegionIndex = 1, cAudioFormatIndex = 4, InputGain = 0 OutputGain = 0
[PrimeShare] t_SetAudioOutPutGain : eSoundId = 0, Input Gain = 0, Output Gain = 0
[PrimeShare] t_SetSPDIF_PCM_Level : eSrc 0, DDCompMode 1 (RFmode:1), Factory value 1, SDAL set value 0
==================== DCDsmManager pid = 56
[SS][EventSender::InstallEventCallback(),LINE:43 ]

==========================================================
WARNING!!! 2173 Initialize Error Retry : 3[ShareSiBT2C_Write] Error!!!
[ShareSiBT2C_Write] Error!!!
==================================================
--------------- NORMAL MODE COMPLETE--------------
==================================================
System proccess >>>>> [ SYSTEM_READY ]
[ShareSiBT2C_Write] Error!!!
[ShareSiBT2C_Write] Error!!!
[ShareSiBT2C_Write] Error!!!
[ShareSiBT2C_Write] Error!!!
[ShareSiBT2C_Write] Error!!!
[ShareSiBT2C_Write] Error!!!
[ShareSiBT2C_Write] Error!!!
[ShareSiBT2C_Write] Error!!!
[ShareSiBT2C_Write] Error!!!
[ShareSiBT2C_Write] Error!!!
[AP_INFOLINK/Fatal] 54 : CNNaviAppBase::t_Create()
[ShareSiBT2C_Write] Error!!!
[ShareSiBT2C_Write] Error!!!
[ShareSiBT2C_Write] Error!!!
[ShareSiBT2C_Write] Error!!!
[ShareSiBT2C_Write] Error!!!
[AP_INFOLINK/Fatal] 55 : CNNaviLoadingBase::Create()
[AP_INFOLINK/Fatal] 56 : Create Loading OSD for TV or Monitor
[ShareSiBT2C_Write] Error!!!
[ShareSiBT2C_Write] Error!!!
[AP_INFOLINK/Fatal] 57 : END CNNaviLoadingBase::Create()
[ShareSiBT2C_Write] Error!!!
[ShareSiBT2C_Write] Error!!!
[ShareSiBT2C_Write] Error!!!
[AP_INFOLINK/Fatal] 58 : CNNaviMsg::Create()

>>[ERR:TDsSiBTunerT2C.cpp] t_InitTCTuner():1233 Si2173_Initialize
[ShareSiBT2C_Write] Error!!!
==========================================================
[ShareSiBT2C_Write] Error!!!
[ShareSiBT2C_Write] Error!!!
[ShareSiBT2C_Write] Error!!!
MApi_DDC2BI_CurrMDrv_DDC2BI_light_Init.832 Fail
entSource.239
[ShareSiBT2C_Write] Error!!!

>>[ERR:TDsPrimeAnalogVideoProcessor.cpp] GetColorSystem():1040 Get Color System Error eCorSys = [0]
[TPAWindow.cpp][ConnectSource][WID:0][CALL]..
Crop win invalid!!
Disp win invalid!!
==========================================================
WARNING!!! 2173 Initialize Error Retry : 3[ShareSiBT2C_Write] Error!!!
[ShareSiBT2C_Write] Error!!!
[ShareSiBT2C_Write] Error!!!
[ShareSiBT2C_Write] Error!!!
others
[ShareSiBT2C_Write] Error!!!
[ShareSiBT2C_Write] Error!!!
[ShareSiBT2C_Write] Error!!!
[ShareSiBT2C_Write] Error!!!
old ICC_CRD_SRAM: 255, new ICC_CRD_SRAM: 6
[ShareSiBT2C_Write] Error!!!
[ShareSiBT2C_Write] Error!!!
[ShareSiBT2C_Write] Error!!!
[ShareSiBT2C_Write] Error!!!
others
[ShareSiBT2C_Write] Error!!!
[ShareSiBT2C_Write] Error!!!

>>[ERR:TDsPrimeScaler.cpp] SetMonitorOut():1932 It failed in setting a scaler Aux out mute!!! (Off)
[Scaler]
TDResolution_k : [15]
TDResolutionInfo_t [720], [576], [0], [0], [864], [625], [0], [50000], [1], [0], [0], [0], [0], [0], [0], [0], [257], [1], [0], [17], [0], [0]
Source : 257 Window Type : 0 Back End Decoder Type : 4, tdRet=0
[ShareSiBT2C_Write] Error!!!
[ShareSiBT2C_Write] Error!!!
[ShareSiBT2C_Write] Error!!!
[ShareSiBT2C_Write] Error!!!
[ShareSiBT2C_Write] Error!!!
HAL_AUDIO_SeReloadCode finish
[ShareSiBT2C_Write] Error!!!
[ShareSiBT2C_Write] Error!!!
[ShareSiBT2C_Write] Error!!!

=== Reload SIF PAL setting ===

[PrimeShare] t_SetSPDIF_PCM_Level : eSrc 101, DDCompMode 1 (RFmode:1), Factory value 1, SDAL set value -9
[PrimeShare] t_GetAudioOutPutGain : cRegionIndex = 1, cAudioFormatIndex = 4, InputGain = 0 OutputGain = 0
[PrimeShare] t_SetAudioOutPutGain : eSoundId = 0, Input Gain = 0, Output Gain = 0
[TPAWindow.cpp][ConnectSource][WID:0][END]..
[Scaler]
TDResolution_k : [15]
TDResolutionInfo_t [720], [576], [0], [0], [864], [625], [0], [50000], [1], [0], [0], [0], [0], [0], [0], [0], [257], [1], [0], [17], [0], [0]
[BackEnd]
TDResolution_k : [15]
TDResolutionInfo_t [720], [576], [0], [0], [864], [625], [0], [50000], [1], [0], [0], [0], [0], [0], [0], [0], [257], [1], [0], [17], [0], [0]
others

SET 50 Hz m_VideoSetting.sScaleData.frameRate = 50000
APP set Mute Case delay 80msec

>>[ERR:TDsSiBTunerT2C.cpp] t_InitTCTuner():1233 Si2173_Initialize
[ShareSiBT2C_Write] Error!!!
==========================================================
[ShareSiBT2C_Write] Error!!!
iUserOSDFromMsub:6
OPTIONS_Gamma:5, WBMovie_Gamma:0, M_Sub_Gamma:5, M_Sub_Natural_Gamma:3, iGammaOSD:3
MApi_XC_MLoad_GetStatus()
SetCondition eCondition = [3] bValue=[1]
SetCondition eCondition = [4] bValue=[1]
[TPAWindow.cpp][ConnectSource][WID:4][CALL]..
[Scaler]
TDResolution_k : [15]
TDResolutionInfo_t [720], [576], [0], [0], [864], [625], [0], [50000], [1], [0], [0], [0], [0], [0], [0], [0], [257], [1], [0], [17], [0], [0]
Source : 257 Window Type : 4 Back End Decoder Type : 4, tdRet=0

>>[ERR:TDsPrimeAudioProcessor.cpp] Connect():1227 - SDAL ERROR [-2] !!!
[TPAWindow.cpp][ConnectSource][WID:4][END]..
[Scaler]
TDResolution_k : [15]
TDResolutionInfo_t [720], [576], [0], [0], [864], [625], [0], [50000], [1], [0], [0], [0], [0], [0], [0], [0], [257], [1], [0], [17], [0], [0]
## [EnableScreen] Screen(0), Caller(2)
[PLF][IsEnabled:148] SCREEN0 (true)
## [EnableScreen] Screen(1), Caller(2)
[PLF][IsEnabled:148] SCREEN1 (false)
[X6_Screen32.cpp:Enable:419] SCREEN1
[SdGfx_Mute:1176-TID(144)] screen(1) On(1)/Off(0) : 1
[PLF][Enable:189] SCREEN1 OK
[DEFAULT/Debugging] 59 : [t_OnSystemReady:6697] First, Display Channel Banner Start(9430)
[DEFAULT/Debugging] 60 : [t_OnSystemReady:6708] First, Display Channel Banner End(9600)
network_init start in /etc/Scripts/rest_mount.sh !!
[ShareSiBT2C_Write] Error!!!
====================================================================
[SELP] mdrv_emac module load!!(1003_192 RELEASE preempt mod_unload MIPS32_R2 32BIT )
====================================================================
mount mtd_swu
mount: mounting /dev/stl1/33 on /mtd_swu failed: No such device or address
This program is operated over FSR based
Can not open /dev/bml1/33 file. system error message : No such device or address

+---------------------------------------------------------------------+
| stl.format : STL-level Partitioning Tool for Flash Block Devices |
+---------------------------------------------------------------------+
Can not open /dev/bml1/33 device file. system error message : No such device or address

can not open a image
mount: mounting /dev/stl1/33 on /mtd_swu failed: No such device or address
mount mtd_contents
mount: mounting /dev/stl1/34 on /mtd_contents failed: No such device or address
This program is operated over FSR based
Can not open /dev/bml1/34 file. system error message : No such device or address

+---------------------------------------------------------------------+
| stl.format : STL-level Partitioning Tool for Flash Block Devices |
+---------------------------------------------------------------------+
Can not open /dev/bml1/34 device file. system error message : No such device or address

can not open a image
mount: mounting /dev/stl1/34 on /mtd_contents failed: No such device or address
mount mtd_rwcommon
mount: mounting /dev/stl1/35 on /mtd_rwcommon/ failed: No such device or address
This program is operated over FSR based
Can not open /dev/bml1/35 file. system error message : No such device or address

+---------------------------------------------------------------------+
| stl.format : STL-level Partitioning Tool for Flash Block Devices |
+---------------------------------------------------------------------+
Can not open /dev/bml1/35 device file. system error message : No such device or address

can not open a image
[ShareSiBT2C_Write] Error!!!
mount: mounting /dev/stl1/35 on /mtd_rwcommon failed: No such device or address
mount mtd_rwdata
mount: mounting /dev/stl1/36 on /mtd_rwdata/ failed: No such device or address
This program is operated over FSR based
Can not open /dev/bml1/36 file. system error message : No such device or address

+---------------------------------------------------------------------+
| stl.format : STL-level Partitioning Tool for Flash Block Devices |
+---------------------------------------------------------------------+
Can not open /dev/bml1/36 device file. system error message : No such device or address

can not open a image
mount: mounting /dev/stl1/36 on /mtd_rwdata failed: No such device or address
[A_APPMW/Fatal] 61 : [CAppUtil::Check[CIP_KERNEL] ae80 is authuld length : file open success(rootfs)
ResetAfterPnpOTN]
[A_APPMW/Fatal] 62 : [CAppUtil::CheckResetAfterPnpOTN] PnPcheck File doesn't exist
[CIP_KERNEL] >>> (/bin/authuld) file is successfully authenticated <<
[CIP_AUTHULD] ====================================▒