|
fault : Switches after approx. 30 min to standby, starts immediately again for approx. 10 sec. via RC, then standby again.
repair tip :
Middle transistor pos. 7AO6 (BC847BW) on the main board top on A9 at the top right above the LF IC (TDA8932T) has thermal fault. This is part of the circuit DC detection, which switches appliance via microprocessor (M30300SAGP) pin 71/DC_PROT to standby.
br Elvis
| 
Файлы
Прошивки
Продажа
Литература
Статьи
Зарегистрировано всего