getdip
close

IPL: RNEG (6426.C1/0), 300 MHz

[ver.08504A, built 2008-12-11 10:36:57 1461424]

CS0: NOR

boot img #0 from NOR [FPGA present]... --- loaded 19546 KB in 1582 ms [5589 => 12651 K/sec]

*** jumping to c0200bc0 ...

Startup: PL_qnx_startup-atlas2_07241A, built 2007/06/11_14-47-38_UTC

Board: 00006426.000000c1

RAM: 124 MB

FLASH: 64 MB @0x10000000

cpu_clock=300000000, dsp_clock=200000000, sys_clck=100000000, io_clock=100000000

Dcache: 512x32 WB

Icache: 512x32

arm926 rev 4 300MHz

System page at phys:c0017000 user:fc404000 kern:fc404000

Starting next program at vfd0203a8

-------------------------------------------

Welcome QNX6.3 - Harman/Becker PSA RNEG/NG4

STARTING RNEG_D BOOT SCRIPT

VERSION: A09493B_R20h_R20.16

-------------------------------------------

#

dev-ipc HAL, Init CH7 SwDl PATCH...

dev-ipc HAL,Init: Init successfull (Up=4, Ui=400, Ub=57600, Uc=20, Ut=24, Ud=1, Us=PSA_RNEGB_C_SMPL)

dev-adjmanager: PL_qnx_dev-adjmanager_07074A, built 2007/02/15_07-20-14_UTC

unknown symbol: ado_debug

No wakeup reason received

intAmp: start internal Amplifier!

TEMP: MOUNT total 2145 ms (comp: 4208.7 kB/s, uncomp: 9279.7 kB/s)

REMOUNTING /HBpersistence R/W by PIFSLoadOnDemand...

Path=0 - QSSL SERCD

target=0 lun=0 CD-ROM(5) - Shinwa CDC-02HB1-CA Rev:

CSPOnOffRequester.cpp:932: FATAL ERROR "OnOffExecutor is in failure state!" occureddumping to /HBpersistence/core/early.core

/HBpersistence/core/early.core: No such file or directory

Emergency Shutdown:: Exit(-1)

SRV-STARTER - Process launch manager (version core 4.1.3)

This configuration was created with the TaSC Editor v2.3

XML Configuration version: 23

Max ProcessRestart count: 9

Process count: 44

Interface count: 31

Package count: 23

Environment count: 0

getdip
close

IPL: RNEG (6426.C1/0), 300 MHz

[ver.08504A, built 2008-12-11 10:36:57 1461424]

CS0: NOR

NAND id=0.0.0.64: iobase=80070000, SM_WAIT=1343

Entering CLI, type '?' for help

=> rz

zmodem_rx: establishing contact with sender

**B0100000027fed4

**B0100000027fed4

--- done: err=0; addr=0xc2000000, len=0x13e598

*** jumping to c0200bc0 ...

Startup: PL_qnx_startup-atlas2_07241A, built 2007/06/11_14-47-38_UTC

Board: 00006426.000000c1

RAM: 128 MB

FLASH: 64 MB @0x10000000

cpu_clock=300000000, dsp_clock=200000000, sys_clck=100000000, io_clock=100000000

Dcache: 512x32 WB

Icache: 512x32

arm926 rev 4 300MHz

System page at phys:c0017000 user:fc404000 kern:fc404000

Starting next program at vfd0203a8

-------------------------------------------

Welcome QNX6.3 - Harman/Becker PSA RNEG/NG4

STARTING RNEG_D BOOT SCRIPT

VERSION: INSTALL

Author: Michael Hupfer

-------------------------------------------

starting System logger

starting pipe manager

starting dev-sysregs

starting NOR flash driver

starting USB resource manager

waiting 10 seconds

Unable to access /dev/hd0

waiting 10 seconds

Unable to access /dev/hd0

Process 77835 (devb-sd-atlasii) terminated SIGSEGV code=1 fltno=11 ip=00102668 ref=c7b3b000