Мои познания в ремонте данного вида техники: Занимаюсь ремонтом Наличие схемы: yes Hi Guys, I have 2 PRX 635 modules: 1 problem: they have very low audio output. The preamp part works well and also shows the clip but on the 3 outputs I have a very low audio from all 3 channels. Same problem on the other amplifier. what do you recommend I check? 2 problem: I also found that only on one of the 2 amplifiers the 2 8ohm zobel resistors on the high channel heat up a lot. I checked the mosfets and they seem good, could it be the capacitors?
rail voltage is +23V and -23V is it correct? it seems strange to me because the electrolytic capacitors are 63V.
Файлы
Прошивки
Продажа
Литература
Статьи
Для просмотра сообщения Вы должны быть Участником форума. Для этого Вам необходимо 
Зарегистрировано всего