Мои познания в ремонте данного вида техники: Любитель Наличие схемы: No VD-5565EU22BC6LV0.1 T-con BN94-06666A ASSY PCB MISC-FRC BN41-02076A BN94-06621A BN94-06666A FRC BOARD FOR UN55F9000 55" TV BN41-01950C BN94-07229 Main board L65D2L BN44-00675A Power Ic 1902 = 24c512 Ic 3701 = 25Q128 Ic 3301 = 25Q128
One-Connect BN94-06653B Code : BN41-02038D Model : BN41-02038
Defect: the TV turns on and asks for the One-Connect connection, once connected, it goes into a continuous loop, the Smart TV writing appears, for a few seconds and the boot cycle starts again from the beginning. I'm trying to enter service mode (INFO-Menu-MUTE-POWER ON), to load the firmware from USB and enable the SUBMICOM UPGRADE option to ON, an operation already performed with other Samsung models, but on this TV there is no way to enter service. I also tried the MENU-182-POWER ON sequence, but when you press button 1 the TV turns on. Using a serial RS 232 cable with Hyperterminal I have the following log, which I attach Thanks for the advice.
Файлы
Прошивки
Продажа
Литература
Статьи
Для просмотра сообщения Вы должны быть Участником форума. Для этого Вам необходимо 
Зарегистрировано всего