=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2024.12.27 03:30:32 =~=~=~=~=~=~=~=~=~=~=~=
NotifyWakeupDeviceForAP(0x8)яUART_115200

BIST0-OK

[0123456789A][123456789A][123456789A][0123456789A]-5555
_
Wait CRC done
u32CRC32_HW=0x76D46900
CRC OK
UFlash is detected (0x0503, 0xC2, 0x20, 0x17)
MDrv_SERFLASH_Init() done
MApp_DB_Check()
MApp_DB_GEN_Init()
=> GoodUnit=0, WriteTime=257

--gsc test MApp_CheckWhiteBalanceSetting-u16CheckSum=0x59F8-

===>>DB_CH: Load data to dram ok~ --ypf0220

===>>msAPI_CM_InitDTVDataManager --ypf0220

=====>>> CreatDTVProgramIndexTableAndProgramIDTable --ypf0220 1 ,1 => GoodUnit=0, WriteTime=257
HAL_SYS_QueryDolbyHashInfo(0x00000001) not support!!!
HAL_SYS_QueryDolbyHashInfo(0x00000002) not support!!!

00176849005D
Auth OK
In HAL_AUDIO_SetDspBaseAddr, line(4340), u8Index(0x2), u32Bin_Base_Address(0x0), u32Mad_Base_Buffer_Adr(0x1225000)

[[utopia]] 2 DSPBinBaseAddress = 0x0
[[utopia]] 2 DSPMadBaseBufferAdr = 0x1225000
[[utopia]] 2 DSPMadMIUBank = 0
In HAL_AUDIO_SetDspBaseAddr, line(4340), u8Index(0x2), u32Bin_Base_Address(0x26C400), u32Mad_Base_Buffer_Adr(0x1225000)

[[utopia]] 2 DSPBinBaseAddress = 0x26C400
[[utopia]] 2 DSPMadBaseBufferAdr = 0x1225000
[[utopia]] 2 DSPMadMIUBank = 0
HAL_MAD2_SetMemInfo : SE_DSP_DDR_ADDR = 0x01465000, DEC_R2_ADDR = 0x01225000
======> Audio DEC_R2 Base : 1225000
MDrv_AUDIO_SeSystemLoadCode()

[======= initialize DEC-R2[0] SHM =======]
audio DSP_SE LoadCode success..
[[utopia]] MApi_AUDIO_SetCommand() : Audio system is not ready yet, please try again later

 [Warning!!]No SRS TSXT license!!
[[utopia]] MApi_AUDIO_ReleaseDecodeSystem() : Audio system is not ready yet, please try again later
[[utopia]] MApi_AUDIO_ReleaseDecodeSystem() : Audio system is not ready yet, please try again later
[[utopia]] MApi_AUDIO_ReleaseDecodeSystem() : Audio system is not ready yet, please try again later

Keypad Initialize OK
MDrv_PNL_Init u32PnlRiuBaseAddr = BF200000
MDrv_PNL_Init u32PMRiuBaseAddr = BF000000
[_MDrv_PNL_Init_LPLL][305]pstPanelInitData->u16Width=1366, pstPanelInitData->u16Height=768
[_MDrv_PNL_Init_LPLL][307]u16HTotal=1560,u16VTotal=806,pstPanelInitData->u16HTotal=1560,pstPanelInitData->u16VTotal=806, u16DefaultVFreq=600
[_MDrv_PNL_Init_Output_Dclk][350]pstPanelInitData->u16Width=1366, pstPanelInitData->u16Height=768
[_MDrv_PNL_Init_Output_Dclk][352]u16HTotal=1560,u16VTotal=806,pstPanelInitData->u16HTotal=1560,pstPanelInitData->u16VTotal=806, u16DefaultVFreq=600
[XC,Version] 00442327
MApi_XC_Init, 560, pXC_InitData->stPanelInfo.eLPLL_Type=1
no need to patch
PQ INPUTTYPE NUM MISMATCH: MAIN != EXUTOPIA ASSERT: 0 core/driver/pq/drvPQ.c MDrv_PQ_Set_DisplayType_Main 6361
** MHL function support in port A

MHL Init, MHL_TYPE = 0x10

** Milan Load MHL EDID...

** Milan Load DevCap...

** MHL third DTD start at 9F in port A

** MHL total have 6 DTD in port A

** MHL get video data block length 12 in port A

** MHL get audio data block length 3 in port A

** MHL get speaker allocation data block length 3 in port A

** MHL get vender specific data block length 5 in port A

** MHL Cbus initial mux to port A

mapi_mhl_init()

[GOP_ALL, PID 0, TID 0x-1][Driver Version]: 0089, BuildNum: 0002, ChangeList: 00524916
====================
First GOP driver instance, flush GWIN HW
====================

[HAL_TSP_CPU_SetBase][3295] load firmware (address, size) = (0x00FA4F00, 0x00005468)
firmware 111 0x00FA4F00 0x00000000 0x0000FA4F
[DMX] VQ Buf 11AC000 ,VQ Size 17DC0, Dummy Buf 11C3DC0
[HAL_DSCMB_SetBank][265] Set bank 0xBF200000
MApi_XC_SetupFrameBuffer(src=43)
=> XC-Main = SCALER_DNR_BUF

@@@@ msAPI_Tuner_Initialization(1,0,2-DEMOD_TYPE_DVBT2)---------------------mdev_CofdmInit

MDrv_Dish_Init failed-1-ReadBytes fail!
MDrv_Dish_Init failed-2-WriteBytes fail!

Cannot find matched input source=2, pls checku32ReadBuffVirAddr = A5253000, u32IntBuffVirAddr = A52B0000, u32OutBuffVirAddr = A4A4A000
verJPD_SetStatus >>>>>>>>>>> w:1366, h:768, p:1368

[GOP0, PID 0, TID 0x-1][Driver Version]: 0089, BuildNum: 0002, ChangeList: 00524916
>> DVBT2 SoftStop Fail!
DSP code loaded successfully
[VD] force=0
MApi_XC_SetupFrameBuffer(src=1)
=> XC-Main = SCALER_DNR_BUF
_MAPP_EPGDB_Setup: [Current EPG DB occupy size: 0x83CAB0]; [Max EPG DB config. size: 0x840000]

======================================
== Chakra3 Software Version: 0.00
[SW_CONFIG]: MILAN_128M_DVBT_PLUS_DVBC
[Board]: BD_MST073B_10AGS
[Panel]: WXGA_AU20_T200XW02
[MEMORY_MAP]: MMAP_128MB
[DRAM SIZE]: 144 MB
[FLASH SIZE]: 8 MB
[ENABLE_DTV]
[ATV]: PAL
[Mirror]: 1
[ENABLE_PWS]: 1
[ENABLE_POWER_SAVING_DPMS]: 1
[DEMO_FINE_TUNE]: DFT_STD_FULLHD_CMO216
[ENAB
E
-MTC_KEYPAD-wPM_WakeUpDevice=0x2093