|
Всем привет.
Такой же комбайн. Сброс питания во время обновления.
Пытаюсь прошить. Коннектится, шьется, потом пытается переподключиться и вылетает в ошибку. Нужна помощь.
Signal Dev Change!
AMBA_USB_Init:()
AMBA_USB_Dev_Init:()
Found 0 busses, 1 devices changed
AMBA_OS_Get_USB_Location:(05423710,0093E8D0,0093E8D4)
Filename=\\.\libusb0-0001--0x4255-0x000a
bus=0, port=0
AMBA_OS_Get_USB_Location.(0)
AMBA_USB_Configure:(0x05423710,0x0093E8D8)
Dev#1: 0x4255 (Amba) : 0x000A () : 123456789ABC has 1 configs
AMBA_USB_Configure.(0x05415538)
AMBA_Check_State: (0x0093E8D8)
State is BOOT
AMBA_Check_State. (0x0)
Found 1 AMBA device!
AMBA_USB_Dev_Init.
Cmd=C:\Program Files (x86)\TrendVision\USB-III\sv\a12\bstconfig.exe
Ini="C:\Program Files (x86)\TrendVision\USB-III\sv\a12\bst_a12evk.ini"
Input="C:\Program Files (x86)\TrendVision\USB-III\sv\a12\spieeprom.bin"
Generate DRAM parameters "C:\Program Files (x86)\TrendVision\USB-III\sv\a12\bst_a12evk.bin" ok
DLL=C:\Program Files (x86)\TrendVision\USB-III\sv\a12\draminit.dll
BIN=C:\Program Files (x86)\TrendVision\USB-III\sv\a12\bst_a12evk.bin
AMBA_Load_DLL:(C:\Program Files (x86)\TrendVision\USB-III\sv\a12\draminit.dll)
AMBA_Get_DLL_Func:(00FF0000,init_dram_controller)
Init DRAM ok.
AMBA_Free_DLL:(00FF0000)
AMBA_USB_Init.(1)
AMBA_USB_Dev_Deinit:()
AMBA_USB_Dev_Deinit.()
AMBA_USB_Init:()
AMBA_USB_Dev_Init:()
Found 0 busses, 0 devices changed
AMBA_OS_Get_USB_Location:(05423710,0093E8C8,0093E8CC)
Filename=\\.\libusb0-0001--0x4255-0x000a
bus=0, port=0
AMBA_OS_Get_USB_Location.(0)
AMBA_USB_Configure:(0x05423710,0x0093E8D0)
Dev#1: 0x4255 (Amba) : 0x000A () : 123456789ABC has 1 configs
AMBA_USB_Configure.(0x05412518)
AMBA_Check_State: (0x0093E8D0)
State is BOOT
AMBA_Check_State. (0x0)
Found 1 AMBA device!
AMBA_USB_Dev_Init.
Cmd=C:\Program Files (x86)\TrendVision\USB-III\sv\a12\bstconfig.exe
Ini="C:\Program Files (x86)\TrendVision\USB-III\sv\a12\bst_a12evk.ini"
Input="C:\Program Files (x86)\TrendVision\USB-III\sv\a12\spieeprom.bin"
Generate DRAM parameters "C:\Program Files (x86)\TrendVision\USB-III\sv\a12\bst_a12evk.bin" ok
DLL=C:\Program Files (x86)\TrendVision\USB-III\sv\a12\draminit.dll
BIN=C:\Program Files (x86)\TrendVision\USB-III\sv\a12\bst_a12evk.bin
AMBA_Load_DLL:(C:\Program Files (x86)\TrendVision\USB-III\sv\a12\draminit.dll)
AMBA_Get_DLL_Func:(00FF0000,init_dram_controller)
Init DRAM ok.
AMBA_Free_DLL:(00FF0000)
AMBA_USB_Init.(1)
ConvertELF(D:\Users\user\Desktop\SHO-ME Combo No5 A12\bst_bld_pba_sys_dsp_rom.elf):
ConvertELF(0).
AMBA_Set_Boot_File: (0x1,D:\Users\user\Desktop\SHO-ME Combo No5 A12\bst_bld_pba_sys_dsp_rom.e2b)
AMBA_Set_Boot_File. ()
AMBA_USB_Download:(0,0x1,6)
Reinit start wait.
AMBA_Load_File_BST: (C:\Program Files (x86)\TrendVision\USB-III\sv\a12\ambhal.bin,0xa0000,0)
AMBA_Load_File: (C:\Program Files (x86)\TrendVision\USB-III\sv\a12\ambhal.bin,0x00000000,0x06EFEAD8)
AMBA_Load_File. (0)
Load file start.
Load file end.
AMBA_Load_File_BST. (0)
AMBA_Load_File_BST: (C:\Program Files (x86)\TrendVision\USB-III\bld\a12.bin,0x0,1)
AMBA_Load_File: (C:\Program Files (x86)\TrendVision\USB-III\bld\a12.bin,0x00000000,0x06EFEAD8)
AMBA_Load_File. (0)
Load file start.
Load file end.
AMBA_Load_File_BST. (0)
[0] AMBA_USB_Reinit_Wait: (1,1)
[0] Wait device re-init...
Reinit start signal.
AMBA_USB_Dev_Scan:()
Found 0 busses, 1 devices changed
Found 0 AMBA device!
AMBA_USB_Dev_Scan.
Reinit start wait.
Reinit start signal.
AMBA_USB_Dev_Scan:()
Found 0 busses, 0 devices changed
Found 0 AMBA device!
AMBA_USB_Dev_Scan.
Reinit start wait.
[0] Not found.
[0] AMBA_USB_Reinit_Wait. (-1)
BLD execute failed.
[0] Failed!!
AMBA_USB_Download. (-1)
Reinit start wait.
Скачать файл можно после регистрации регистрация | вход
| 
Файлы
Прошивки
Продажа
Литература
Статьи
Зарегистрировано всего