bought unbranded chinese CAR DVR Camera stop recording while card gets full.
DO NOT DO : Tried to flash the camera by putting a file name 1628.bin and holding menu button and pressing power for 3 sec , this make my camera not power on.
While connecting to PC and holding the REC button found out the camera is based on SUNPLUS SPCA1521 IC. PCB of the camera is HD 005C-V4-MAIN 20/2/09 board.
After a lot of searching found the ISP tool 1628 and camera driver . (please note that because the driver is unsigned , on windows 7 need to press F8 while boot and force loading unsigned drivers).
After driver is installed and ok (on device manager) , run the isp tool and burn the 2013 file with its param and bins , this fix the camera .
Файлы
Прошивки
Продажа
Литература
Статьи
Для просмотра сообщения Вы должны быть Участником форума. Для этого Вам необходимо 
Зарегистрировано всего