Using:
8bit bus
Fast timing (16MHz)
Use Fixed Block operation
Using Ignore Errors
eMMC OCR 0xC0FF8080 after 1 attempts
CMD1 Get Response Error!
R3 Response Check Bits Error (0x96)!
eMMC (0) CID = 13014E53304A39463810003C03C8A4 (C7)
CMD2 Get Response Error!
Found 1 eMMC device(s)
eMMC CSD = D05F01328F5913FFFFFFFFEF964000
eMMC: Version 4.xx
eMMC: DSR Implemented
eMMC: Read Block Length 512 byte
eMMC: Write Block Length 512 byte
eMMC: Card High Capacity
eMMC: CSD User Partition Size = 1073741824 Byte
eMMC: WP Status True
eMMC: WP Size 16 erase groups
eMMC: Permanent WP is False
eMMC: Temorary WP is False
Valid mode SDR 1/4/8 bit
SET: Using HS Timing
eMMC: EXT_CSD User Partition Size = 62537072640 Byte - судя по этой инфе, она на 64Gb
eMMC: Version 5.1
EXTCSD: FW CONFIG = 0x0
EXTCSD: PARTITION CONFIG = 0x8
EXTCSD: BOOT BUS WIDTH = 0x0
eMMC: Erase Group Size = 512 KByte (1024 blocks)
eMMC: Boot partition size 4194304 byte
eMMC: RPMB partition size 4194304 byte
RPMB: Use correct key to read/write! (2)
eMMC MID = 0x0013, OEM ID = 0x4E01
eMMC Product Name = S0J9F8
eMMC Serial number = 0x3C03C8
eMMC Revision = 1.0
eMMC Date 10/2001
Application Error : Division by zero