Phase Scan in Set Parameters Stage

0x1f, 0x11, 0x15, 0x09, 0x14, 0x09, 0x76
0x12, 0x12, 0x1a, 0x1a

Boot start
Boot2_SPI
2OK

BootManager V1.7

>> Pressing <space> key enter boot-menu
>> App Start...

Uart initialize Success
MPLL frequency = 399999916

[DRV_DEBUG] DEBUG VERSION
DBG P
>> [DRV_DEBUG] DRV_DBass

{DRV_FLASH_IG_Initialize Success
nitialize} Manufactory Code=0xEF, DeviceID=0x15
Flash Pass
target frequency = 13880, I2C Clock Div = 22a
I2C0 Pass
FP Pass
>>>_drv_init,811,At boot, ID=1, Wakeup event=0x0
STBC Misc Pass
STBC IPC Pass
STBC IO Pass
STBC RTC Pass
STBC PBC Pass
STBC Ir Pass
E2P Pass
ADC Pass
T NIM Pass
TSPU Pass
STC Pass
HAL_VDEC_CreateIntrrupt
OS_InterruptCreate DRV VDEC: 0
OS_InterruptCreate DRV PSBM: 0
VDEC Pass
ADEC Pass
NT78336/layer_bgp.c, LAYER_BGP_Initial
@@200000 | 0 | b3fffeff | 3e0000 | 20000000 | 0
@@c4000000 | 0 | efc9f7ff | 80000000 | 8000038 | 0
Video Layer 1 Pass
Video Layer 2 Pass
Video OSD 1 Pass
Video OSD 2 Pass
Cursor 1 Pass
Blit Pass
JPU Pass
DeviceName = VMIX0
VMIX Pass
TVE Pass
DeviceName = VTG0
VTG Pass
Set HDMI trimming success
<<< start to do USB initial >>>
Creat MAU Interrupt Done

STBC SW Date:51434508
STBC SW Ver:26199

FP SW Init!

FP_EventSubscribe: Handle = 80881ff8
>> PBC Open

u32DeviceMaxNum 1
u32DataPathMaxNum 3
u32PidMaxNum 64
u32FiltMaxNum 32
u32BufAlignmentLimited 4096
u32BufSizeMinLimited 4096
Create [0] TSPU TTX Queue Handle 0x82fd0c90
Create [0] TSPU Subtitle Queue
Create [0] TSPU Data Queue
Create [0] TSPU CloseCaption Queue
Create [1] TSPU TTX Queue Handle 0x82fd0bd0
Create [1] TSPU Subtitle Queue
Create [1] TSPU Data Queue
Create [1] TSPU CloseCaption Queue
Create [2] TSPU TTX Queue Handle 0x82fd0b10
Create [2] TSPU Subtitle Queue
Create [2] TSPU Data Queue
Create [2] TSPU CloseCaption Queue
Create TSPU QueueDeviceName = VMIX0
DeviceName = VTG0
VTG_SetMode, VTGTiming => 2001
_VTG_SetVouTimingMode, VOU Out VTGTiming => 2002
_VTG_SetPI2TimingMode, PI2 Out VTGTiming => 2001
[PARSER]PLAT_PARSER_Register_Interrupt_Handle Enter
>>>_plat_init,1721,At boot, ID=1, Wakeup event=0x20

T2 demod Mem Addr: 808a0000 (533333)

T2 demod Mem Addr(oproc): c10000 (533333)

T2 demod Mem Addr config done!BMT[01]=00, del=00
BMT[02]=01, del=00

app nvm[345] timer nvm[396] all nvm [8156]
PLAT_INI_PowerLed_SetClokPort - Set RF clok![0]
[HDMI power down]DRV_HDMI_Disable(4312)
Write 0xC0C0C0C0 to add 0xBD140450
_TVE_Check_VDACTrim:Get VDAC trimming Success
Now init app nvm
[ver:1.01e.48-USB]
irq_num = 35 controller added
ehci_local0: EHCI version 1.0, with 1 ports.........
ehci_local0: USB revision 2.0
ehci_local0: new device port=0 depth=0 speed=high
uhub0
uhub0: 1 port with 1 removable, self powered
No such table in sharebank !table id=0xc0
IR initialze error
MID_EZM_GetCustomizeParam 0

>> The command name is repeated <<

>> The command name is repeated <<

>> The command name is[Work]0 repeated <<
xa392ee60
[Display
>> The command name i]0xa3af0ea0
[Active]0s repeated <<
xa392ee60

>> The command name is repeated <<

>> The command name is repeated <<

[AVC
>> The command name is repeated <<
TRL] _A
>> The command name is repeated <<
vctrlEvt
>> The command name is repeated <<
HdmiCallback no receiver : Screen Offset domain to AnalogVTG_SetMode, VTGTiming => 2001
_VTG_SetVouTimingMode, VOU Out VTGTiming => 2002
_VTG_SetPI2TimingMode, PI2 Out VTGTiming => 2001
[Work]0xa392e2e0
[Display]0xa392e660
[Active]0xa392e2e0
[Work]0xa392dce0
[Display]0xa392dda0
[Active]0xa392dce0
F-mid_ezm_GetLogo,L-551 data error: !
[MPEG2VPU_DecodeInit]
pstCodecContext->stSetBuff.u32BitStreamBufAddr=a276a000
pstCodecContext->stSetBuff.u32BitStreamBufSize=500000
pstCodecContext->stSetBuff.u32BitStreamPhy2VirOffset=a0000000
pstCodecContext->stSetBuff.u32FrameBufAddr=a0de9800
pstCodecContext->stSetBuff.u32FrameBufSize=1980000
pstCodecContext->stSetBuff.u32FramePhy2VirOffset=a0000000
pstCodecContext->stSetBuff.u32WorkBufAddr=a2c6ac28
pstCodecContext->stSetBuff.u32WorkBufSize=359999
pstCodecContext->stSetBuff.u32WorkPhy2VirOffset=a0000000
pstCB->u32ScanAddr=a0de9800
stack_ptr : 0x807b61e4
stack_size : 8000
priority : 6
arg : 80861f80
entry_fn : 0x80344018
cleanup_fn : 0x80341910
ThreadName : 80861f80(0x8076b7e0)
Create decode thread for handle <80861f80>
open ok 500 msec320 NOT Support this fucntion : LAYER_DISP_SetBorder
>>>>>>>>>>>>>>LAYER_DISP_SetVideoWindow:(0)
InHs:0, InVs:0, InHw:720, InVw:480
OutHs:0, OutVs:0, OutHw:720, OutVw:480
SrcW:720, SrcH:480, WindowWidth:0

LAYER_DISP_DisplayCtrl, 0, 0

[AVCTRL]
[8580]AVCTRL_AutoAdjustAudRAWMode TO MODE[3] RAW[2]/PCM[3]EN_NT336T_TUNESetSpeed fail, STC is iR_R836
ver:1.020.48-NTnvalid
78336T-R8
[AVCTRL] _AvctrlEvtVdecCallback sent vid stop to mid 36
Se
[AVCTRL] _AvctrlEvtAdecCallback sent aud stop to mid
Receive Stot MPLL: 80.000/240.000p command and Notify,co/200.000

TSIF :18mmand[0]

[AVCTRL] _AvctrlEvtAdecCallback sent aud stop to mid
Check leon run ff!irq_num = 36 controller added
ehci_local1: EHCI version 1.0, with 1 ports.........
ehci_local1: USB revision 2.0
ehci_local1: new device port=0 depth=0 speed=high
uhub1
uhub1: 1 port with 1 removable, self powered
os_notify: Host bus 80715f88 going into suspend
os_notify: Host bus 80715f98 going into suspend
Get pic info fail, picture information is not ready
>>>>>>>>>>>>>>LAYER_DISP_SetVideoWindow:(0)
InHs:0, InVs:0, InHw:720, InVw:480
OutHs:120, OutVs:44, OutHw:720, OutVw:576
SrcW:720, SrcH:576, WindowWidth:0

Get pic info fail, picture information is not ready
>>>>>>>>>>>>>>LAYER_DISP_SetVideoWindow:(0)
InHs:0, InVs:0, InHw:720, InVw:480
OutHs:120, OutVs:44, OutHw:720, OutVw:576
SrcW:720, SrcH:576, WindowWidth:0

PowerOn = 6
Cannot engage Mobile font: ArInitFont () failed
error code (see bi_lib.h BI_ERROR_xxx): -51

DEV_SCART_SetTVType 16:9.

DEV_SCART_SetVideoFormat CVBS.
Get pic info fail, picture information is not ready
>>>>>>>>>>>>>>LAYER_DISP_SetVideoWindow:(0)
InHs:0, InVs:0, InHw:720, InVw:480
OutHs:120, OutVs:44, OutHw:720, OutVw:576
SrcW:720, SrcH:576, WindowWidth:0

DEV_SCART_SetTVType 16:9.

DEV_SCART_SetTVType 16:9.

DEV_SCART_SetTVType 16:9.
getCurSubtGet pic info fail, pictitleInfo: MID_SIMON_Geure information is not tStreamInfo fail!
ready
>>>>>>>>>>>>>>LAYER_DISP_SetVideoWindow:(0)
InHs:0, InVs[Error] Out Of Reg:0, InHw:720, InVw:480
ion[3379]
OutHs:120, OutVs:44, OutHw:720, OutVw:576
SrcW:720, SrcH:576, WindowWidth:0

DEV_SCART_SetTVType 16:9.

Dicator [57]
[network/terra/is already shown!!!!nt336t/terra_nt336t.c](Terra_SetChannel_NT336T) pstChannel->u32SymbRateKHz:0

[network/terra/nt336t/terra_nt336t.c](Terra_SetChannel_NT336T) stSetChannelParams.u32InputFreqKHz:562000

[network/terra/nt336t/terra_nt336t.c](Terra_SetChannel_NT336T) stSetChannelParams.u32BandWidthMHz:8

[network/terra/nt336t/terra_nt336t.c](Terra_SetChannel_NT336T) stSetChannelParams.enMODMoulation:0

[network/terra/nt336t/terra_nt336t.c](Terra_SetChannel_NT33Write 0xC0C0C0C0 to add 0xBD140450
_TVE_Check_VDACTrim:Get VDAC trimming Success
6T) stSetChannelParams.enMODSetChMode:1

[network/terra/nt336t/terra_nt336t.c](Terra_SetChannel_NT336T) stSetChannelParams.enMODChAcq:2

[network/terra/nt336t/terra_nt336t.c](Terra_SetChannel_NT336T) stSetChannelParams.enBroadcastSys:3

[network/terra/nt336t/terra_nt336t.c](Terra_SetChannel_NT336T) stSetChannelParams.enTunerSys:0

CH Acq: 2
stPLPID: 0
BandWidthMHz: 8
InputFreqKHz: 562000

SetChannel PID:0-0-0 Demod:2

R840_DVB_T2_8M_IF_5M

Send RMode by COMM_REG(2)

Leon reset done!(4)

Set MPLL: 80.000/240.000/200.000

TSIF :14
Set T2 CH_Acq type: T2 All

[###] dPLP ID: 0 mode: 1
Type:0 RMode:0

Send RMode by COMM_REG(0)

Leon reset done!(44)
[Error] Out Of Region[3379]

_NT336T_WaitLock: Got Signal ®...

[MPEG2VPU_DecodeEnd]
VDEC_NullFunction
Delete decode thread EventFlagWait is fail (successfully
[H264D16a)
EC_Init]
pstCodecContext->stSetBuff.u32BitStreamBufAddr=a276a000
pstCodecContext->stSetBuff.u32BitStreamBufSize=500000
pstCodecContext->stSetBuff.u32BitStreamPhy2VirOffset=a0000000
pstCodecContext->stSetBuff.u32FrameBufAddr=a0de9800
pstCodecContext->stSetBuff.u32FrameBufSize=1980000
pstCodecContext->stSetBuff.u32FramePhy2VirOffset=a0000000
pstCodecContext->stSetBuff.u32WorkBufAddr=a2c6ac28
pstCodecContext->stSetBuff.u32WorkBufSize=359999
pstCodecContext->stSetBuff.u32WorkPhy2VirOffset=a0000000
pstCB->u32ScanAddr=a0de9800
stack_ptr : 0x807b61e4
stack_size : 8000
priority : 6
arg : 80854e00
entry_fn : 0x80344018
cleanup_fn : 0x80341910
ThreadName : 80854e00(0x83ed1510)
Create decode thread for handle <80854e00>
open ok 500 msec320 NOT Support this fucntion : LAYER_DISP_SetBorder
>>>>>>>>>>>>>>LAYER_DISP_SetVideoWindow:(0)
InHs:0, InVs:0, InHw:720, InVw:480
OutHs:0, OutVs:0, OutHw:720, OutVw:480
SrcW:720, SrcH:480, WindowWidth:0

LAYER_DISP_DisplayCtrl, 0, 0

[AVCTRL]
[8580]AVCTRL_AutoAdjustAudRAWMode TO MODE[3] RAW[2]/PCM[3]---------------EN_PLAT_DEC_SYNC_MASTER_ADEC_PCRFIRSTSTC
Set Video handle = 54460100
Set Audio handle = 54460200
initialize sequence failed[0]
SetSpeed fail, STC is invalid
getCurSubtitleInfo: MID_SIMON_GetStreamInfo fail!
=> enMode Value (1) => Stereo:1, Joint Stereo:2, Dual:3, Single:4, MultiCh:5 => SPK MODE Value (0x3) => Pass [ec (0)][H264SH]PW[ 720], PH[ 576], CW[ 720], CH[ 576], P/L[77/30], FR[25000], ASP[4], ProgSeq[0], MaxNumRef[ 3]
[H264SH]DONE, FBNN[ 6], FBSN[11394432]
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
pstCB->enDecodeType->[4]
H/v [720/576]>
pstCB->u32FrameRateFromParser->[0.000000]
pstCodecContext->stMotionInfo.f32FrameRate->[25.000000]
FrameRate->[25.000000]
pstCB->b8IsVFR->[0]
PTSReOrder->[0]
u32FrameBufAddr->[0xa0de9800]
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
[SetupBuffer]Allocate (2048)x(1088). WBS[3224]KB,FBS[26112]KB,maxFrameCnt[ 8]canBeUsed
[SetupBuffer]PS[2048],PW[ 720],PH[ 576],picSize[3342336],colSize[652800],minFrameNeeded[8]
FrameBufNum/MinReqFrameNum:[8/6][2048]

[AVCTRL] vid start AR : 16_9>>>>>>>>>>>>>>LAYER_DISP_SetVideoWindow:(0)
InHs:0, InVs:0, InHw:720, InVw:576
OutHs:120, OutVs:44, OutHw:720, OutVw:576
SrcW:720, SrcH:576, WindowWidth:0

DEV_SCART_SetTVType 16:9.

[AVCTRL] _AvctrlEvtVdecCallback frame rate --PAL50--
SIMONPmtProcess:: Receive PMT

[AVCTRL] _AvctLAYER_DISP_DisplayCtrl, 0, 1
rlEvtVdecCallback sent vid dec ok to mid[Error] Out Of Region[3379]
###################u8GetDispUnmute#################

[AVCTRL] Report Path[0] vid status to mid[2]
[AVCTRL] Report Path[0] aud status to mid[2]
LG
3790 @@@@ mid_simon stPLPInfo.u16TSID= 11 stPLPInfo.u16ONID= 8835 (0 | 0)

T2 ONID or TSID , (8835 11)!!(8835 11 | 8835 11) u16PLPNum= 2 u16PLPIndex = 0

{DEV_FP_MapKey} [Alan]u32KeyCode=0x4f

{DEV_FP_MapKey} u8KeyIdx=0x0

paEventListInfo nullLAYER_DISP_DisplayCtrl, 0, 0
320 NOT Support this fucntion : LAYER_DISP_SetBorder
HA
[AVCTRL] _AvctrlEvtVdecCallback sent vid stop to mid L_VDEC_Abort
Set Video handle = 54
[AVCTRL] _AvctrlEvtAdecCallback sent aud stop to mid 460100
Set Audio handle = 54460200
Set AD handle = 00000000

PLAT_AVES_ChangeAVPID Error 1
PLAT_AVES_ChangeAVPID Error 1[HDMI power down]DRV_HDMI_Disable(4312)

{DEV_FP_MapKey} [Alan]u32KeyCode=0x4f

{DEV_FP_MapKey} u8KeyIdx=0x0

{DEV_FP_MapKey} [Alan]u32KeyCode=0x4f

{DEV_FP_MapKey} u8KeyIdx=0x0
Cut off power and enter while(1) protect.
PLAT_INI_PowerLed_SetClokPort - Set RF clok![1]

Родная:
FlashROM JEDEC ID, type: EF4016h
Winbond W25Q32BV/FV (4MB)
S/N = DE653447CB682238h
Новая:
FlashROM JEDEC ID, type: EF4016h
Winbond W25Q32BV/FV (4MB)
S/N = D666382896330F30h
Отличаются только серийниками...
Зато в старом добром SPI FlashROM Programmer при инициализации микрос обнаружились вот такие различия:

Разный статус, что какой параметр означает уже не помню, надо читать мануал.

А может LB3, LB2, LB1 Это не Lock Byte, как я подумал, а что то другое?? Именно этими тремя битами флешки отличаются...