LED TV Neo Model: LE-2419D Main Board: CV9203L-Q24 CPU: SPV9203B 1625-DBN Spi Flash: U3-GD25Q32 Panel: CX236DLEDM Led Stryp: 2x ZDCX236D06-ZC14F-02 or analog: 2x MS-L1895 V4 - (12 dioda x 3v) Power Supply: On Board
If the TV stays with the Led in standby, this fault is repaired with this firmware! 1- Unzip the attached file.
2- Copy the file SISEU23X8M.bin to the root of a Pen Drive.
3- Unplug the TV and insert the pen into the USB port of the TV
4- Connect the tv to the power, you will see that soon after the LED starts to flash slowly and that after a few minutes it blinks quickly, then disconnect the TV from the power and remove the USB pen.
Принесли ТВ с отсутствующим звуком. На УНЧ не было напряжения. Выгорел резистор по питанию из-за КЗ глины. После замены керамики и восстановления питания звук нормальный. После этого считан и сохранен дамп.