Hello world, 285o!{uni}[WEI]
****System Start****
[arm64]
svn:890afef9ce291f00 (Apr 19 2021 14:36:41)
flash_type = 2, secure_type = 2
b8062204=a5
wrong crc32, cur crc32_val = 603b0489, orig = 00000000
HW off: 0
ABCDEt.y.0.0 t.y.1.0 t.y.2.0 t.y.3.0 [F] 03 05 04 06
T.21
r.y.0
R.6
[RPMB]Auth Key is Ready!!! Test Print1 SB2_CTRL_REG_reg=0x0
Test Print1 SB2_CTRL_REG_reg=0x1
Test Print1 SB2_CTRL_REG_reg=0x0
Test Print1 SB2_CPU_FLASH_REGION=0xba20b820
[go atf]U

U-Boot 2012.07 (Apr 19 2021 - 14:35:05) r-Sync_20201028_140311-3067-g890afef9ce

[ENV] Writing to Factory...
factory_tarsize = 0x1ba400
[FAC] factory_save: MMC
[FAC] Save to eMMC (blk#:0x10000, buf:0x23900000, len:0x1ba600)
[FAC] Save to eMMC (seq#:0xe82, pp:0)
done
Factory Address:0x2000000, Size:0x1000000!
Factory Read Only Address:0x1800000, Size:0x400000!
[abner] CusApi_env_relocate:32
[abner]: setenv avb value is from env set
1://smarttv.json Size: 10256 byte(s).
can not fount node [support]

set ir data to share memory by json config
1:/common/irmap/HKFAC_SQY.bin Size: 472 byte(s).
share memory for irmap <58/494>, 1:/common/irmap/HKFAC_SQY.bin register 58
irda_select_value1=7-hikeen
1:/common/irmap/HKSTD.bin Size: 368 byte(s).
share memory for irmap <103/494>, 1:/common/irmap/HKSTD.bin register 45
1:/common/irmap/SQY_RC057A_10.bin Size: 512 byte(s).
share memory for irmap <166/494>, 1:/common/irmap/SQY_RC057A_10.bin register 63
1:/common/irmap/HK10D.bin Size: 640 byte(s).
share memory for irmap <245/494>, 1:/common/irmap/HK10D.bin register 79
irda_select_value=1-hikeen

set keypad data to share memory by json config
range = 15
start = 210
channel = 0
function = 549
multi_function = 28
share memory for keypad <1/8>, adc0 register fd2000001 [210..15]
range = 12
start = 45
channel = 0
function = 139
multi_function = 139
share memory for keypad <2/8>, adc0 register c2d000001 [45..12]
range = 12
start = 76
channel = 0
function = 105
multi_function = 105
share memory for keypad <3/8>, adc0 register c4c000001 [76..12]
range = 12
start = 105
channel = 0
function = 106
multi_function = 106
share memory for keypad <4/8>, adc0 register c69000001 [105..12]
range = 12
start = 133
channel = 0
function = 108
multi_function = 108
share memory for keypad <5/8>, adc0 register c85000001 [133..12]
range = 12
start = 173
channel = 0
function = 103
multi_function = 103
share memory for keypad <6/8>, adc0 register cad000001 [173..12]
range = 20
start = 0
channel = 0
wakeup true
function = 116
multi_function = 116
share memory for keypad <7/8>, adc0 register 1001400000001 [0..20]

initial order config at bootcode by json config
fenghl -> pre_init_board_backlight
1://smarttv.json Size: 10256 byte(s).
fenghl -> backlight_limitation_switch = 0
fenghl -> OB3352
fenghl -> backlight_control_ic_type = 0
fenghl -> board_type = 2851
change PIN_BL_ADJ 0xb280fea861000107 to 0xb280fea861800107
change PIN_BL_ADJ 0xb280fea861800107 to 0xd080fea861800107
change PIN_BL_ADJ 0xd080fea861800107 to 0xd0d0fea861800107
readusbfile 0
led_flash_when_boot_process: 1
led enum_pin_led_index: 0

set panel data by json config
1:/common/panel/SQY_HV550QUB_S1E_853_UHD.fw Size: 140 byte(s).
[abner] get_factory_test:351 readusbfile = 0

(Re)start USB...
USB0: ----------- ehci_hcd_init -----------
#@# ehci_hcd_init(452) ehci mac0
----------- usb2_crt on(0) -----------
----------- usb2_crt -----------
----------- usb2_crt on(1) -----------
----------- usb2_crt -----------
[ehci], info, #@# usb2_phy_setting(335) +++ for usbphy setting 20170420
[ehci], info, #@# usb2_phy_setting(337) ---
----------- ehci_usb_mac_init -----------
USB EHCI 1.00
scanning bus 0 for devices... 2 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
1: Hub, USB Revision 2.0
- u-boot EHCI Host Controller
- Class: Hub
- PacketSize: 64 Configurations: 1
- Vendor: 0x0000 Product 0x0000 Version 1.0
Configuration: 1
- Interfaces: 1 Self Powered 0mA
Interface: 0
- Alternate Setting 0, Endpoints: 1
- Class Hub
- Endpoint 1 In Interrupt MaxPacket 8 Interval 255ms

2: Vendor specific, USB Revision 2.0
- Realtek 802.11n 64E003CED472
- Class: (from Interface) Vendor specific
- PacketSize: 64 Configurations: 1
- Vendor: 0x0bda Product 0xf179 Version 0.0
Configuration: 1
- Interfaces: 1 Bus Powered Remote Wakeup 500mA
Interface: 0
- Alternate Setting 0, Endpoints: 3
- Class Vendor specific
- Endpoint 1 In Bulk MaxPacket 512
- Endpoint 2 Out Bulk MaxPacket 512
- Endpoint 3 Out Bulk MaxPacket 512

abner file = cus_env_panel.c, func = HK_CusApi_env_setup_panel_parameter, line = 181 boot_lvds_map = -1, boot_lvds_depth = -1
abner file = cus_env_panel.c, func = HK_CusApi_env_setup_panel_parameter, line = 182 boot_swap_ab = -1
[heath]T2=50,T3=200,T4=200,T5=40,T6=1200
abner file = cus_env_panel.c, func = HK_CusApi_env_setup_panel_parameter_from_facro, line = 199 hk_save_to_factory_ro = 0
file 1:/common/pq/SQY_HV550QUB_S1E_853_UHD_PQ.bin is decompress already
file 1:/common/pq/SQY_HV550QUB_S1E_853_UHD_OSD.bin is decompress already
file 1:/common/pq/SQY_HV550QUB_S1E_853_UHD_HDR.bin is decompress already
default pq file tmp/factory/bin_panel/PanelParam/vip_default_pq.bin exsit!
1: Hub, USB Revision 2.0
- u-boot EHCI Host Controller
- Class: Hub
- PacketSize: 64 Configurations: 1
- Vendor: 0x0000 Product 0x0000 Version 1.0
Configuration: 1
- Interfaces: 1 Self Powered 0mA
Interface: 0
- Alternate Setting 0, Endpoints: 1
- Class Hub
- Endpoint 1 In Interrupt MaxPacket 8 Interval 255ms

2: Vendor specific, USB Revision 2.0
- Realtek 802.11n 64E003CED472
- Class: (from Interface) Vendor specific
- PacketSize: 64 Configurations: 1
- Vendor: 0x0bda Product 0xf179 Version 0.0
Configuration: 1
- Interfaces: 1 Bus Powered Remote Wakeup 500mA
Interface: 0
- Alternate Setting 0, Endpoints: 3
- Class Vendor specific
- Endpoint 1 In Bulk MaxPacket 512
- Endpoint 2 Out Bulk MaxPacket 512
- Endpoint 3 Out Bulk MaxPacket 512

read FactoryAutomation/EnableFactoryMode/EnableFactoryMode 0x200 bytes to check file exist ...

** Invalid boot device **
[WARN] check_file_in_usb:Read FactoryAutomation/EnableFactoryMode/EnableFactoryMode 0x200 bytes from USB failed. (0x1)

<<<<<<Panel: SQY_HV550QUB_S1E_853_UHD>>>>>>>>

<<<<<<parameter_len: 140 >>>>>>>>
logbuf fifo[0] [buffer=1ca0e000], [size=10000]
logbuf fifo[1] [buffer=1ca1e000], [size=2000]
logbuf fifo[2] [buffer=1ca20000], [size=10000]
logbuf fifo[3] [buffer=1ca30000], [size=10000]
logbuf fifo[4] [buffer=1ca40000], [size=10000]
logbuf fifo[5] [buffer=1ca50000], [size=20000]
logbuf fifo[6] [buffer=1ca70000], [size=10000]
------------parse tmp/factory/vsc_resource.xml ok!
------------parse tmp/factory/throttle_resource.xml ok!
------------parse tmp/factory/cpu_resource.xml ok!
panel initialize....
panel_init_1st 0529_1022
------------- TCON HTPDN Pull Low [-1]
------------- TCON HTPDN Pull Low status [3000000f]
den_h_start=280, den_h_end=4120
=== panel_vby1_tx_phy ====== Panel Index : 2 ===
[TCON]No demand of TCON(outputgamma,valc,OD,demura) setting.
In: serial
Out: serial
Err: serial
Net: r8168: REALTEK RTL8168 @0x18016000
wov state=0
Hit Esc or Tab key to enter console mode or rescue linux: 0

------------can't find tmp/factory/recovery
name=PIN_KEYPAD_PWR ppcb_enum.Name=PIN_KEYPAD_PWR, ppcb_enum.info=74000a00000001
key press can't locate adc

** Invalid boot device **
ac_on_update_mac_address:3232

ac_on_update_mac_address
ac_on_update_CI_key:3516
cikey.bin exist! No need CI key again!
ac_on_update_hdcp_key:3395
Error: reading boot sector
first_HDCP:
reading hdcpwrited.used
Error: reading boot sector
hdcp_file_name=HDCP/
reading HDCP/
Error: reading boot sector
read HDCP file fail
ac_on_update_hdcp_key22:3455
Error: reading boot sector
first_HDCP:
reading hdcp2writed.used
Error: reading boot sector
hdcp_file_name=HDCP2/
reading HDCP2/
Error: reading boot sector
read HDCP2 file fail
ac_on_update_SN_key:3587
Error: reading boot sector
first_SnKey:
reading snkey.used
Error: reading boot sector
snkey_file_name=SnPlusKey/
reading SnPlusKey/
Error: reading boot sector
file_fat_read failed!!!!!
image_name new
1://smarttv.json Size: 10256 byte(s).
get image_name install_2851.img
[abner] check_usb_into_factory_mode:2018 check_usb_into_factory_mode

** Invalid boot device **

** Invalid boot device **

** Invalid boot device **
stopping USB..
----------- usb2_crt on(0) -----------
----------- usb2_crt -----------
USB is stopped. Please issue 'usb start' first.
(Re)start USB...
USB0: ----------- ehci_hcd_init -----------
#@# ehci_hcd_init(452) ehci mac0
----------- usb2_crt on(0) -----------
----------- usb2_crt -----------
----------- usb2_crt on(1) -----------
----------- usb2_crt -----------
[ehci], info, #@# usb2_phy_setting(335) +++ for usbphy setting 20170420
[ehci], info, #@# usb2_phy_setting(337) ---
----------- ehci_usb_mac_init -----------
USB EHCI 1.00
scanning bus 0 for devices... 2 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
1: Hub, USB Revision 2.0
- u-boot EHCI Host Controller
- Class: Hub
- PacketSize: 64 Configurations: 1
- Vendor: 0x0000 Product 0x0000 Version 1.0
Configuration: 1
- Interfaces: 1 Self Powered 0mA
Interface: 0
- Alternate Setting 0, Endpoints: 1
- Class Hub
- Endpoint 1 In Interrupt MaxPacket 8 Interval 255ms

2: Vendor specific, USB Revision 2.0
- Realtek 802.11n 64E003CED472
- Class: (from Interface) Vendor specific
- PacketSize: 64 Configurations: 1
- Vendor: 0x0bda Product 0xf179 Version 0.0
Configuration: 1
- Interfaces: 1 Bus Powered Remote Wakeup 500mA
Interface: 0
- Alternate Setting 0, Endpoints: 3
- Class Vendor specific
- Endpoint 1 In Bulk MaxPacket 512
- Endpoint 2 Out Bulk MaxPacket 512
- Endpoint 3 Out Bulk MaxPacket 512

read FactoryAutomation/EnableFactoryMode/EnableFactoryMode 0x200 bytes to check file exist ...

** Invalid boot device **
[WARN] check_file_in_usb:Read FactoryAutomation/EnableFactoryMode/EnableFactoryMode 0x200 bytes from USB failed. (0x1)
abner hikeen_boot_update_mode = 0, hikeen_boot_power_update = 0, boot_mode = 2

====== boot_ac_on=1 ======
image_name release

Start Boot Setup ...
FW Table to 0x06800000, size=0x00000a00 (0x06800a00)
FW Table fr 0x04000000, fw count: 50
[OK] fw_entry[0] offset = 0x8000 length = 0x1ab0df4 (paddings = 0x2800000) act_size = 0 part_num = 0
[OK] fw_entry[1] offset = 0x2808000 length = 0x1ed128 (paddings = 0x500000) act_size = 0 part_num = 0
[OK] fw_entry[2] offset = 0x2d08000 length = 0x3d63d8 (paddings = 0x600000) act_size = 0 part_num = 0
[OK] fw_entry[3] offset = 0x3308000 length = 0xa19a0 (paddings = 0xc00000) act_size = 0 part_num = 0
[OK] fw_entry[4] offset = 0x3f08000 length = 0x5eec00 (paddings = 0x5eec00) act_size = 0 part_num = 0
Normal boot fw follow...
vFlipEnable 0 boot_av->bRotate 0
Linux Kernel:
FW Image to 0x00108000, size=0x01ab0df4 (0x01bb8df4)
FW Image fr 0x04008000 (non-lzma)
Audio FW 1:
FW Image to 0xdeaddead, size=0x001ed128 (0xdeccafd5)
FW Image fr 0x06808000 (non-lzma)
Enter standby, skip this entry
Video FW 1:
FW Image to 0xdeaddead, size=0x003d63d8 (0xdeeb4285)
FW Image fr 0x06d08000 (non-lzma)
Enter standby, skip this entry
TEE FW target_addr = 0x16008000
(skip)
show raw video raw file ddr 0x84f00000 len 0xec5e00
FW Image to 0x84f00000, size=0x005eec00 (0x854eec00)
FW Image fr 0x07f08000 (non-lzma)
Enter standby, skip this entry
current avb status on
do_avb_init success!!!!!
current avb status on
## Android Verified Boot 2.0 version 1.1.0
sw sha256 ret 0
sw sha256 ret 0
[abner] set default uart closed !
EVer:3ґ1054373
(build:3ЛJul 17 2019 3Ч13:36:23)
share[0x0]:0x370001
share[0x1]:0x100014
share[0x2]:0x0
share[0x3]:0x0
share[0x4]:0x0
share[0x5]:0x0
share[0x6]:0x0
share[0x7]:0x0
share[0x8]:0x0
share[0x9]:0x0
share[0xa]:0x0
share[0xb]:0x0
share[0xc]:0x0
share[0xd]:0x1
share[0xe]:0xfe019f88
share[0xf]:0xfe019f88
share[0x10]:0xb9467d02
share[0x11]:0xa05f5fa0
share[0x12]:0xe31c7f00
share[0x13]:0xb44bdf20
share[0x14]:0xd12e5fa0
share[0x15]:0x0
share[0x16]:0x3
share[0x17]:0x0
share[0x18]:0x0
share[0x19]:0x0
share[0x1a]:0x0
share[0x1b]:0x0
share[0x1c]:0x0
share[0x1d]:0x401f00
share[0x1e]:0x401e00
share[0x1f]:0x401d00

PwNum:0x30x0 M
0xa, 0xas
0x14, 0x14s
0x1e, 0x1es
0x28, 0x28s
Keypad_match.
wake

PwNum:0x3
EMCU final!
BI$
Hello world, 285o!{uni}[WEI]
****System Start****
[arm64]
svn:890afef9ce291f00 (Apr 19 2021 14:36:41)
flash_type = 2, secure_type = 2
b8062204=a5
wrong crc32, cur crc32_val = 603b0489, orig = 00000000
HW off: 0
ABCDEt.y.0.0 t.y.1.0 t.y.2.0 t.y.3.0 [F] 03 05 04 06
T.21
r.y.0
R.6
[RPMB]Auth Key is Ready!!! Test Print1 SB2_CTRL_REG_reg=0x0
Test Print1 SB2_CTRL_REG_reg=0x1
Test Print1 SB2_CTRL_REG_reg=0x0
Test Print1 SB2_CPU_FLASH_REGION=0xba20b820
[go atf]U

U-Boot 2012.07 (Apr 19 2021 - 14:35:05) r-Sync_20201028_140311-3067-g890afef9ce

queyr---Mac Address use 7c:82:74:7a:4c:68 in factory_ro
[ENV] Writing to Factory...
factory_tarsize = 0x1ba400
[FAC] factory_save: MMC
[FAC] Save to eMMC (blk#:0x14000, buf:0x23900000, len:0x1ba600)
[FAC] Save to eMMC (seq#:0xe83, pp:1)
done
Factory Address:0x2000000, Size:0x1000000!
Factory Read Only Address:0x1800000, Size:0x400000!
[abner] CusApi_env_relocate:32
[abner]: setenv avb value is from env set
1://smarttv.json Size: 10256 byte(s).
can not fount node [support]

set ir data to share memory by json config
1:/common/irmap/HKFAC_SQY.bin Size: 472 byte(s).
share memory for irmap <58/494>, 1:/common/irmap/HKFAC_SQY.bin register 58
irda_select_value1=7-hikeen
1:/common/irmap/HKSTD.bin Size: 368 byte(s).
share memory for irmap <103/494>, 1:/common/irmap/HKSTD.bin register 45
1:/common/irmap/SQY_RC057A_10.bin Size: 512 byte(s).
share memory for irmap <166/494>, 1:/common/irmap/SQY_RC057A_10.bin register 63
1:/common/irmap/HK10D.bin Size: 640 byte(s).
share memory for irmap <245/494>, 1:/common/irmap/HK10D.bin register 79
irda_select_value=1-hikeen

set keypad data to share memory by json config
range = 15
start = 210
channel = 0
function = 549
multi_function = 28
share memory for keypad <1/8>, adc0 register fd2000001 [210..15]
range = 12
start = 45
channel = 0
function = 139
multi_function = 139
share memory for keypad <2/8>, adc0 register c2d000001 [45..12]
range = 12
start = 76
channel = 0
function = 105
multi_function = 105
share memory for keypad <3/8>, adc0 register c4c000001 [76..12]
range = 12
start = 105
channel = 0
function = 106
multi_function = 106
share memory for keypad <4/8>, adc0 register c69000001 [105..12]
range = 12
start = 133
channel = 0
function = 108
multi_function = 108
share memory for keypad <5/8>, adc0 register c85000001 [133..12]
range = 12
start = 173
channel = 0
function = 103
multi_function = 103
share memory for keypad <6/8>, adc0 register cad000001 [173..12]
range = 20
start = 0
channel = 0
wakeup true
function = 116
multi_function = 116
share memory for keypad <7/8>, adc0 register 1001400000001 [0..20]

initial order config at bootcode by json config
fenghl -> pre_init_board_backlight
1://smarttv.json Size: 10256 byte(s).
fenghl -> backlight_limitation_switch = 0
fenghl -> OB3352
fenghl -> backlight_control_ic_type = 0
fenghl -> board_type = 2851
change PIN_BL_ADJ 0xb280fea861000107 to 0xb280fea861800107
change PIN_BL_ADJ 0xb280fea861800107 to 0xd080fea861800107
change PIN_BL_ADJ 0xd080fea861800107 to 0xd0d0fea861800107
readusbfile 0
led_flash_when_boot_process: 1
led enum_pin_led_index: 0

set panel data by json config
1:/common/panel/SQY_HV550QUB_S1E_853_UHD.fw Size: 140 byte(s).
[abner] get_factory_test:351 readusbfile = 0

abner file = cus_env_panel.c, func = HK_CusApi_env_setup_panel_parameter, line = 181 boot_lvds_map = -1, boot_lvds_depth = -1
abner file = cus_env_panel.c, func = HK_CusApi_env_setup_panel_parameter, line = 182 boot_swap_ab = -1
[heath]T2=50,T3=200,T4=200,T5=40,T6=1200
abner file = cus_env_panel.c, func = HK_CusApi_env_setup_panel_parameter_from_facro, line = 199 hk_save_to_factory_ro = 0
file 1:/common/pq/SQY_HV550QUB_S1E_853_UHD_PQ.bin is decompress already
file 1:/common/pq/SQY_HV550QUB_S1E_853_UHD_OSD.bin is decompress already
file 1:/common/pq/SQY_HV550QUB_S1E_853_UHD_HDR.bin is decompress already
default pq file tmp/factory/bin_panel/PanelParam/vip_default_pq.bin exsit!
USB is stopped. Please issue 'usb start' first.
(Re)start USB...
USB0: ----------- ehci_hcd_init -----------
#@# ehci_hcd_init(452) ehci mac0
----------- usb2_crt on(0) -----------
----------- usb2_crt -----------
----------- usb2_crt on(1) -----------
----------- usb2_crt -----------
[ehci], info, #@# usb2_phy_setting(335) +++ for usbphy setting 20170420
[ehci], info, #@# usb2_phy_setting(337) ---
----------- ehci_usb_mac_init -----------
USB EHCI 1.00
scanning bus 0 for devices... 2 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
1: Hub, USB Revision 2.0
- u-boot EHCI Host Controller
- Class: Hub
- PacketSize: 64 Configurations: 1
- Vendor: 0x0000 Product 0x0000 Version 1.0
Configuration: 1
- Interfaces: 1 Self Powered 0mA
Interface: 0
- Alternate Setting 0, Endpoints: 1
- Class Hub
- Endpoint 1 In Interrupt MaxPacket 8 Interval 255ms

2: Vendor specific, USB Revision 2.0
- Realtek 802.11n 64E003CED472
- Class: (from Interface) Vendor specific
- PacketSize: 64 Configurations: 1
- Vendor: 0x0bda Product 0xf179 Version 0.0
Configuration: 1
- Interfaces: 1 Bus Powered Remote Wakeup 500mA
Interface: 0
- Alternate Setting 0, Endpoints: 3
- Class Vendor specific
- Endpoint 1 In Bulk MaxPacket 512
- Endpoint 2 Out Bulk MaxPacket 512
- Endpoint 3 Out Bulk MaxPacket 512

read FactoryAutomation/EnableFactoryMode/EnableFactoryMode 0x200 bytes to check file exist ...

** Invalid boot device **
[WARN] check_file_in_usb:Read FactoryAutomation/EnableFactoryMode/EnableFactoryMode 0x200 bytes from USB failed. (0x1)

<<<<<<Panel: SQY_HV550QUB_S1E_853_UHD>>>>>>>>

<<<<<<parameter_len: 140 >>>>>>>>
logbuf fifo[0] [buffer=1ca0e000], [size=10000]
logbuf fifo[1] [buffer=1ca1e000], [size=2000]
logbuf fifo[2] [buffer=1ca20000], [size=10000]
logbuf fifo[3] [buffer=1ca30000], [size=10000]
logbuf fifo[4] [buffer=1ca40000], [size=10000]
logbuf fifo[5] [buffer=1ca50000], [size=20000]
logbuf fifo[6] [buffer=1ca70000], [size=10000]
------------parse tmp/factory/vsc_resource.xml ok!
------------parse tmp/factory/throttle_resource.xml ok!
------------parse tmp/factory/cpu_resource.xml ok!
panel initialize....
panel_init_1st 0529_1022
------------- TCON HTPDN Pull Low [96]
------------- TCON HTPDN Pull Low status [32000005]
den_h_start=280, den_h_end=4120
=== panel_vby1_tx_phy ====== Panel Index : 2 ===
[TCON]No demand of TCON(outputgamma,valc,OD,demura) setting.
panel_init_2nd 6187:
panel_init_2nd
:Y: boot current backlight is on ! [1]
pwm_freq_hz = 25000
rtk_hw_get_divider M_best:0 N_best:3 freq:2500000 totalcnt:253 duty_max:254
M = 0x0
N = 0x3
PCB_PIN_TYPE_PWM
set pwm duty=208 success!!

init_backlight_limit_min = 20, init_backlight_limit_max = 255
bootparam is NULL. run default sscg.

dclk_sscg_range = 1

dpll_clk:594294426, dpll_clk_ssc:593699706, div:1
In: serial
Out: serial
Err: serial
Net: r8168: REALTEK RTL8168 @0x18016000
wov state=0
Hit Esc or Tab key to enter console mode or rescue linux: 0

------------can't find tmp/factory/recovery
name=PIN_KEYPAD_PWR ppcb_enum.Name=PIN_KEYPAD_PWR, ppcb_enum.info=74000a00000001
key press can't locate adc
image_name new
1://smarttv.json Size: 10256 byte(s).
get image_name install_2851.img
abner hikeen_boot_update_mode = 0, hikeen_boot_power_update = 0, boot_mode = 2
image_name release

Start Boot Setup ...
FW Table to 0x06800000, size=0x00000a00 (0x06800a00)
FW Table fr 0x04000000, fw count: 50
[OK] fw_entry[0] offset = 0x8000 length = 0x1ab0df4 (paddings = 0x2800000) act_size = 0 part_num = 0
[OK] fw_entry[1] offset = 0x2808000 length = 0x1ed128 (paddings = 0x500000) act_size = 0 part_num = 0
[OK] fw_entry[2] offset = 0x2d08000 length = 0x3d63d8 (paddings = 0x600000) act_size = 0 part_num = 0
[OK] fw_entry[3] offset = 0x3308000 length = 0xa19a0 (paddings = 0xc00000) act_size = 0 part_num = 0
[OK] fw_entry[4] offset = 0x3f08000 length = 0x5eec00 (paddings = 0x5eec00) act_size = 0 part_num = 0
Normal boot fw follow...
vFlipEnable 0 boot_av->bRotate 0
Linux Kernel:
FW Image to 0x00108000, size=0x01ab0df4 (0x01bb8df4)
FW Image fr 0x04008000 (non-lzma)
Audio FW 1:
FW Image to 0x9a500000, size=0x001ed128 (0x9a6ed128)
FW Image fr 0x06808000 (non-lzma)
sw sha256 ret 0
Video FW 1:
FW Image to 0x9a900000, size=0x003d63d8 (0x9acd63d8)
FW Image fr 0x06d08000 (non-lzma)
sw sha256 ret 0
TEE FW target_addr = 0x16008000
(skip)
show raw video raw file ddr 0x84f00000 len 0xec5e00
FW Image to 0x84f00000, size=0x005eec00 (0x854eec00)
FW Image fr 0x07f08000 (non-lzma)
try_load_logo paddr 04f00000 psize (null)
file 1://protect/logo.raw is not exist or An error occured.
can't found 1://protect/logo.raw
file 1://protect/logo.raw.lzma is not exist or An error occured.
can't found 1://protect/logo.raw.lzma
try_load_logo failed
re-calculate bpp 3 width 1920 height 1080
GDMA: init with addr =054eec00
GDMA_init_module, 1st onlineProgDone=0xf
GDMA_init_module, 1st passed
GDMA_init_module, 2nd onlineProgDone=0xf
GDMA_init_module, 2nd passed
GDMA module_init finish
[GDMA] OSD size[3840,2160]
current avb status on
do_avb_init success!!!!!
current avb status on
## Android Verified Boot 2.0 version 1.1.0
sw sha256 ret 0
ACPU1: BISR testing ....
ACPU1 BISR status: ok
_Iait A1go [bADypSaPs] s buf nm[SutB2e
RNSelTeAaT]s e = HW 0 xse00ma0p0h00or00e

[ADSP] af [SB2_INSTAT] = 0x00000000
[ADSP]
[ADSP] -------------------
[ADSP] Audio Version = 1012124 (p6cam-1115138239)
[ADSP] SHA-1: 23a6936
[ADSP] Common Version = 1001140
[ADSP] SHA-1: 3608c74
[ADSP] Binary src compiled at Jan 12 2021 16:23:01
[ADSP] Note = SQA_DailyBuild
[ADSP] -------------------
Enable VCPU1
VCPU1: BISR testing ....
VCPU1 BISR status: ok
VE: BISR testing ....
VE BISR status: ok
Vwait V1go sw sha256 ret 0
[abner] set default uart closed !