фотогалерею высококлассной раритетной техники, побывавшей у меня в ремонте. Собралось некоторое количество фотографий и я думаю, что они будут интересны посетителям сайта. Если у Вас есть что-либо подобное - присоединяйтесь, буду рад.
Поэтому большая просьба - не засорять фотографиями техно-хлама и псевдо-ретро![/cvetgray] По поводу MCS3125 - его стоимость и сейчас переваливает за тысячу зеленых, а характеристики соответствуют высшему классу:
AF Specs 130w x 130w THD @ Rated power .05% 20hz-20khz S/N Ratio: 78db Phono 100db Aux, Tape 1, Tape 2 Input Sensitivity: Phono (magnetic) 2.5mv Aux Tape 1&2 150mv Frequency Response 5-60000hz +/- .3db Tone Controls: +/- 15db at 60hz, 240hz, 1khz, 4khz, 16khz Loudness at -40db 100hz +6db, 10khz +3db Phono Input Capability for .05%THD 200mv FM Tuner Specs: Quieting Sensitivity -30db IHFM at 90, 98, 106mhz 1.7uv 50db quieting sensitivity (mono) at 90, 98, 106mhz 3.0uv S/N ratio 1mv input 98mhz mono 75db, stereo 70db Image Rejection @ 106mhz 85db Selectivity @ 98mhz 100mv input 80db Capture Ratio @ 98mhz 1mv input 1.0db Frequency response at 98mhz w/ 1mv input 20-15000hz Stereo Seperation 98mhz w/ 1mv input: 100hz 40db, 1khz 50db, 10khz 35db Stereo Sensitivity 3uv Distortion @ 98mhz 1mv input, Mono .1%, Stereo .2% AM Tuner Useable Sensitivity -20db S/N 200uv/m S/N Ratio 50db Selectivity 30db Image Rejection 50db Frequency ResponseHz Distortion 1% Unit Measurements 19 11/16 inches wide, 8 5/32 tall, 17 21/64 deep Weight 55lbs Other stuff in the manual: Power Amplification- The amplifiers are arranged in DC amplifier design with triple differential and triple Darlington pure complimentary single ended push pull output capacitor less constructions to provide high gain and non-perceivable distortion. In addition independent power supplies for left and right channels to minimize trangent crosstalk. FM Tuner- The FM front end untilizes a low noise dual gate mosfet and 4 gang tuning capacitor which provides excellent spurious rejection qualities and can accept strong signals without overloading. The IF section incorporates three dual element ceramic filters to provide sharp selectivity with excellent capture ratio. The IF section in combination with advanced PLL circuitry in the FM demodulator delivers phase corrected FM audio for outstanding stereo seperation The extensive use of IC chips coupled with features like the deviation/multipath meter and the solid state AM/FM signal strength display ensure high quality FM broadcast stereo reception.