Может кто богал на прошивку USB. SKYLINE 32YST5975 _ CV6681-B42 _ V320BJ8-Q01 Внутри похоже на Яндекс поверх 11 ведроида. Пришел на прошивку, но при включении нет изо (подсветка есть) и не реагирует на кнопку Power (только одна). На коне все присутствует. Как вариант- клиент или во время обновы питание сдернул, или кривую залить захотел. Судя по логу, еммс живая. Пока не читал.
INFO: BL3-1: Preparing for EL3 exit to normal world INFO: BL3-1: Next image address = 0x20100000 INFO: BL3-1: Next image spsr = 0x1d3 INFO: BIN1_32bit mode May 29 2020 12:16:48 INFO: R1 0 INFO: R2 0 INFO: R3 0 ree_entry cum MTK_LDR U[LDR_SysInit][301]Hardware Initialization [LDR_SysInit][303]MsOS Initialization LIBCODE:Utopia LIBVER:2.1533808479 BUILDHASH:1d48c21 BUILDDATE:2018080917 [LDR_SysInit][305]MIU Initialization [Utopia][MIU]: [MIU INFO] miu open create instance at p with private size 545791024 bytes at p [LDR_SysInit][308]MMIO Initialization [LDR_SysInit][310]SEM Initialization [LDR_SysInit][314]SYS Initialization [Utopia][SYS]: Function = SYSOpen, Line = 1649, current resource pri_shm content is: 0 [Utopia][SYS]: Function = SYSOpen, Line = 1668, [SYS INFO] OPEN INSTANCE... create instance at p with private size 545791248 bytes at p [LDR_SysInit][317]Enable Interrupt [LDR_SysInit][321]Start Timer [SetMiu][271]CONFIG_MIU0_GROUP_PRIORITY = 1:0:2:3 [SetMiu][272]CONFIG_MIU1_GROUP_PRIORITY = 1:0:2:3 [SetMiu][273]CONFIG_MIU0_GROUP_SELMIU = 1004:0024:0000:0000:005F:0000 [SetMiu][274]CONFIG_MIU1_GROUP_SELMIU = 4F6A:3FD1:0000:0000:0000:FEEF [MDrv_MIU_SetGroupPriority_UBoot][274]IN Change miu0 group priority:e1 [MDrv_MIU_SetGroupPriority_UBoot][309]OK [MDrv_MIU_SetGroupPriority_UBoot][274]IN Change miu1 group priority:e1 [MDrv_MIU_SetGroupPriority_UBoot][309]OK [MDrv_MIU_SelectMIU_UBoot][320]IN [MDrv_MIU_SelectMIU_UBoot][323]OK [MDrv_MIU_SelectMIU_UBoot][320]IN [MDrv_MIU_SelectMIU_UBoot][323]OK [LDR_SysInit][327]Initialize BDMA create instance at p with private size 545791440 bytes at p [LDR_SysInit][335]Initialize eMMC
[EHCI] ehci init++ [EHCI] bus base miu0: 0x0, miu1: 0x80000000 [EHCI] qh_buf: 0x20519080(0x60519080) qh size: 64 [EHCI] qtd_buf: 0x2051b080(0x6051b080), qtd size: 32 [EHCI] ehci 0 init++ [EHCI] controller: 0x20892280 ehc_base: 0x1f204800, utmi_base: 0x1f207500, usbc_base: 0x1f200e00 [USB] config miu select [70] [f8] [ef] ][ef] [USB] enable miu lower bound address subtraction [USB] init squelch level 0x2 [EHCI] ehci 0 init-- [EHCI] ehci 1 init++ [EHCI] controller: 0x208a28e0 ehc_base: 0x1f201a00, utmi_base: 0x1f207400, usbc_base: 0x1f200f00 [USB] config miu select [70] [f8] [ef] ][ef] [USB] enable miu lower bound address subtraction [USB] init squelch level 0x2 [EHCI] ehci 1 init-- [EHCI] ehci 2 init++ [EHCI] controller: 0x208b2f40 ehc_base: 0x1f227200, utmi_base: 0x1f221d00, usbc_base: 0x1f227000 [USB] config miu select [70] [f8] [ef] ][ef] [USB] enable miu lower bound address subtraction [USB] init squelch level 0x2 [EHCI] ehci 2 init-- [EHCI] ehci init-- Musb3_init OK ++ [yl] usb_poll for controller: 0x208b2f40 [yl] usb_poll loop:0, controller->devices[0]:0x208b31b0 [EHCI] ehci 2 root portsc: 0x803 highspeed device * found device (0x0bda:0xd723, USB 2.0, MPS0: 64) device has 1 configurations device has 3 interfaces NOTICE: Your device has multiple interfaces and this driver will only use the first one. That may be the wrong choice and cause the device to not work correctly. Please report this case (including the above debugging output) to coreboot@coreboot.org to have the device added to the list of well-known quirks. Interface 0: class 0xe0, sub 0x1. proto 0x1 Class: unsupported class ef usb set_address ok;device address := 1 Detaching device not used by payload [yl] usb_poll for controller: 0x208a28e0 [yl] usb_poll loop:0, controller->devices[0]:0x208a2b50 [yl] usb_poll for controller: 0x20892280 [yl] usb_poll loop:0, controller->devices[0]:0x208924f0
No USB device on U3 port.
No EMMC OAD flag.
No USB or eMMC medium to mount ! USB/EMMC upgrade stop ! [Jump2Uboot][146]Jump2Uboot-Begin ** part_emmc_read_ddb: SKIP Driver Descript Block check [disable_cache][131]Disable Cache [LDR_JumpToApp][160]Jump To 0x28400000
Relocation Offset is: 01A00000 [AT][MB][start ub][1813]
[Mboot] ===== sw IR Config Register ===== [Mboot] ===== Attach IR Interrupt ====== [Utopia][SYS]: Function = SYSOpen, Line = 3585, current resource pri_shm content is: 0 [Utopia][SYS]: Function = SYSOpen, Line = 3604, [SYS INFO] OPEN INSTANCE... create instance at 28FF9360 with private size 108 bytes at 28FF93B0 [Utopia][MIU]: [MIU INFO] miu opencreate instance at 28FF9420 with private size 156 bytes at 28FF9470 [Utopia][MIU]: [MDrv_MIU_SetIOMapBase][188][Utopia][MIU]: Get IOMap MS_MODULE_EXTRIU failurecreate instance at 28FF9510 with private size 60 bytes at 28FF9560
uboot held at [28DDDF60~2A800000],size=01A220A0 Uboot Relocation: 168 MiB Now running in RAM - U-Boot at: 29E00000
eMMC: HS400 200MHz eMMC 7.28 GB eMMC: used life: 0~10% CID:0x0098508D 0x81D80652 0x34465447 0x38000115 ъЂяM : 512MB x 512MB
Файлы
Прошивки
Продажа
Литература
Статьи
Для просмотра сообщения Вы должны быть Участником форума. Для этого Вам необходимо 
Зарегистрировано всего