U-Boot 2010.06-svn (Oct 14 2015 - 15:07:23)

DRAM: 256 MiB
Check spi flash controller v350... Found
Spi(cs1) ID: 0xC2 0x20 0x17 0xC2 0x20 0x17
Spi(cs1): Block:64KB Chip:8MB Name:"MX25L6406E"
envcrc 0xabbf6240
ENV_SIZE = 0xfffc
In: serial
Out: serial
Err: serial
Press Ctrl+C to stop autoboot
CFG_BOOT_ADDR:0x58040000
8192 KiB hi_sfc at 0:0 is now current device

cramfs: wrong magic
### boot/uImage LOAD ERROR<ffffffff> !
Wrong Image Format for bootm command
ERROR: can't get kernel image!
hisilicon #

U-Boot 2010.06-svn (Oct 14 2015 - 15:07:23)

DRAM: 256 MiB
Check spi flash controller v350... Found
Spi(cs1) ID: 0xC2 0x20 0x17 0xC2 0x20 0x17
Spi(cs1): Block:64KB Chip:8MB Name:"MX25L6406E"
envcrc 0xabbf6240
ENV_SIZE = 0xfffc
In: serial
Out: serial
Err: serial
Press Ctrl+C to stop autoboot
CFG_BOOT_ADDR:0x58040000
8192 KiB hi_sfc at 0:0 is now current device

cramfs: wrong magic
### boot/uImage LOAD ERROR<ffffffff> !
Wrong Image Format for bootm command
ERROR: can't get kernel image!
hisilicon #

U-Boot 2010.06-svn (Oct 14 2015 - 15:07:23)

DRAM: 256 MiB
Check spi flash controller v350... Found
Spi(cs1) ID: 0xC2 0x20 0x17 0xC2 0x20 0x17
Spi(cs1): Block:64KB Chip:8MB Name:"MX25L6406E"
envcrc 0xabbf6240
ENV_SIZE = 0xfffc
In: serial
Out: serial
Err: serial
Press Ctrl+C to stop autoboot
hisilicon # run du
Unknown command 'кг▒run' - try 'help'
hisilicon # run du
Hisilicon ETH net controler
MAC: 00-12-16-B8-22-AD
Up/Down PHY not link.
8192 KiB hi_sfc at 0:0 is now current device
DestAddr invalid!
DestAddr: 0x00000000~0x2000000
hisilicon # reset
resetting ...

U-Boot 2010.06-svn (Oct 14 2015 - 15:07:23)

DRAM: 256 MiB
Check spi flash controller v350... Found
Spi(cs1) ID: 0xC2 0x20 0x17 0xC2 0x20 0x17
Spi(cs1): Block:64KB Chip:8MB Name:"MX25L6406E"
envcrc 0xabbf6240
ENV_SIZE = 0xfffc
In: serial
Out: serial
Err: serial
Press Ctrl+C to stop autoboot
CFG_BOOT_ADDR:0x58040000
8192 KiB hi_sfc at 0:0 is now current device

cramfs: wrong magic
### boot/uImage LOAD ERROR<ffffffff> !
Wrong Image Format for bootm command
ERROR: can't get kernel image!
hisilicon # help
? - alias for 'help'
base - print or set address offset
boot - boot default, i.e., run 'bootcmd'
bootd - boot default, i.e., run 'bootcmd'
bootm - boot application image from memory
bootp - boot image via network using BOOTP/TFTP protocol
cmp - memory compare
cp - memory copy
crc32 - checksum calculation
fload - fload - load binary file from a filesystem image for system boot

flwrite - SPI flash sub-system
getinfo - print hardware information
go - start application at address 'addr'
help - print command description/usage
lip - lip - set local ip address but not save to flash

loadb - load binary file over serial line (kermit mode)
loady - load binary file over serial line (ymodem mode)
loop - infinite loop on address range
mac - mac - set mac address and save to flash

md - memory display
mii - MII utility commands
mm - memory modify (auto-incrementing address)
mtest - simple RAM read/write test
mw - memory write (fill)
nm - memory modify (constant address)
ping - send ICMP ECHO_REQUEST to network host
printenv- print environment variables
rarpboot- boot image via network using RARP/TFTP protocol
reset - Perform RESET of the CPU
run - run commands in an environment variable
saveenv - save environment variables to persistent storage
setenv - set environment variables
sf - SPI flash sub-system
sip - sip - set server ip address but not save to flash

tftp - tftp - download or upload image via network using TFTP protocol
version - print monitor version
hisilicon # boot
CFG_BOOT_ADDR:0x58040000
8192 KiB hi_sfc at 0:0 is now current device

cramfs: wrong magic
### boot/uImage LOAD ERROR<ffffffff> !
Wrong Image Format for bootm command
ERROR: can't get kernel image!
hisilicon # flwrite
DestAddr invalid!
DestAddr: 0x00000000~0x2000000
hisilicon # wlwrite help
Unknown command 'wlwrite' - try 'help'
hisilicon # help flwrite
flwrite - SPI flash sub-system

hisilicon # flwrite help
flwrite - SPI flash sub-system

hisilicon # flwrite
DestAddr invalid!
DestAddr: 0x00000000~0x2000000
hisilicon # reset
resetting ...

U-Boot 2010.06-svn (Oct 14 2015 - 15:07:23)

DRAM: 256 MiB
Check spi flash controller v350... Found
Spi(cs1) ID: 0xC2 0x20 0x17 0xC2 0x20 0x17
Spi(cs1): Block:64KB Chip:8MB Name:"MX25L6406E"
envcrc 0xabbf6240
ENV_SIZE = 0xfffc
In: serial
Out: serial
Err: serial
Press Ctrl+C to stop autoboot
CFG_BOOT_ADDR:0x58040000
8192 KiB hi_sfc at 0:0 is now current device

cramfs: wrong magic
### boot/uImage LOAD ERROR<ffffffff> !
Wrong Image Format for bootm command
ERROR: can't get kernel image!
hisilicon # reset
resetting ...

U-Boot 2010.06-svn (Oct 14 2015 - 15:07:23)

DRAM: 256 MiB
Check spi flash controller v350... Found
Spi(cs1) ID: 0xC2 0x20 0x17 0xC2 0x20 0x17
Spi(cs1): Block:64KB Chip:8MB Name:"MX25L6406E"
envcrc 0xabbf6240
ENV_SIZE = 0xfffc
In: serial
Out: serial
Err: serial
Press Ctrl+C to stop autoboot
hisilicon # <INTERRUPT>
hisilicon # run du
Hisilicon ETH net controler
MAC: 00-12-16-B8-22-AD
Up/Down PHY not link.
8192 KiB hi_sfc at 0:0 is now current device
DestAddr invalid!
DestAddr: 0x00000000~0x2000000
hisilicon # <INTERRUPT>
hisilicon # U-Boot 2010.06-svn (Oct 14 2015 - 15:07:23)
Unknown command 'U-Boot' - try 'help'
hisilicon #
hisilicon # DRAM: 256 MiB
Unknown command 'DRAM:' - try 'help'
hisilicon # Found
Unknown command 'Found' - try 'help'
hisilicon # Spi(cs14KB Ch = 0xffn: al
Unknown command 'Spi(cs14KB' - try 'help'
hisilicon # Out:erial
Unknown command 'Out:erial' - try 'help'
hisilicon # 400092 K#ot/ue LO<ffffWronFt footm E: caget m
Unknown command '400092' - try 'help'
hisilicon # <INTERRUPT>
hisilicon # U-Boot 2010.06-svn (Oct 14 2015 - 15:07:23)
Unknown command 'U-Boot' - try 'help'
hisilicon #
hisilicon # DRAM: 256 MiB
Unknown command 'DRAM:' - try 'help'
hisilicon # Found
Unknown command 'Found' - try 'help'
hisilicon # Spi(cs14KB Ch = 0xffn: al
Unknown command 'Spi(cs14KB' - try 'help'
hisilicon # Out:erial
Unknown command 'Out:erial' - try 'help'
hisilicon # 400092 K#ot/ue LO<ffffWronFt footm E: caget m
Unknown command '400092' - try 'help'
hisilicon #