Пришел с соседней мастерской. Прошивали сервисной прошивкой, но не дождались самовыключения. После 100 % отключили от сети, вытащили флешку и после включения получили кирпич. Нужен дамп NAND K9F4G08UOF.
mtdparts variable not set, see 'help mtdparts' Device nand0 not found! incorrect device type in UBILD Partition UBILD not found! read env fail Error: Unrecorgnized NAND mtdparts variable not set, see 'help mtdparts' Device nand0 not found! Error initializing mtdparts! MPOOL volume not found u32EnvRescueOffset = 0x0 mtdparts variable not set, see 'help mtdparts' Device nand0 not found! Error initializing mtdparts! [0;31m[ERROR] raw_read_nand:832: [0mcheck_ubi_partition: UBILD fail [0;31m[ERROR] raw_read:560: [0mread raw data fail [0;31m[ERROR] env_relocate_spec_rescue:1530: [0mWrite CONFIG_ENV_RESCUE_ADDR Fail In: serial Out: serial Err: serial Net: No ethernet found. Set MAC default MAC: 0x0: 0x30: 0x1B: 0xBA:0x2: 0xDB [NC_Init] Yes Toggle DDR NAND Err:[NC_ProbeIfToggleDDR_Ex] err code: 80000036 NAND Err:[NC_ProbeIfToggleDDR_Ex] err code: 80000036 NAND Err:[NC_ProbeIfToggleDDR_Ex] err code: 80000036 NAND Err:[NC_ProbeIfToggleDDR_Ex] err code: 80000036 NAND Err:[NC_ProbeIfToggleDDR_Ex] err code: 80000036 NAND Err:[NC_ProbeIfToggleDDR_Ex] err code: 80000036 NAND Err:[NC_ProbeIfToggleDDR_Ex] err code: 80000036 NAND Err:[NC_ProbeIfToggleDDR_Ex] err code: 80000036 NAND Err:[NC_ProbeIfToggleDDR_Ex] err code: 80000036 NAND Err:[NC_ProbeIfToggleDDR_Ex] err code: 80000036 NAND Err:[NC_ProbeIfToggleDDR_Ex] err code: 80000036 NAND Err:[NC_ProbeIfToggleDDR_Ex] err code: 80000036 NAND Err:[NC_ProbeIfToggleDDR_Ex] err code: 80000036 NAND Err:[NC_ProbeIfToggleDDR_Ex] err code: 80000036 NAND Err:[NC_ProbeIfToggleDDR_Ex] err code: 80000036 NAND Err:[NC_ProbeIfToggleDDR_Ex] err code: 80000036 NAND Err:[NC_ProbeIfToggleDDR_Ex] err code: 80000036 NAND Err:[NC_ProbeIfToggleDDR_Ex] err code: 80000036 NAND Err:[NC_ProbeIfToggleDDR_Ex] err code: 80000036 NAND Err:[NC_ProbeIfToggleDDR_Ex] err code: 80000036 NAND Err:[NC_ProbeIfToggleDDR_Ex] err code: 80000036 NAND Err:[NC_ProbeIfToggleDDR_Ex] err code: 80000036 NAND Err:[NC_ProbeIfToggleDDR_Ex] err code: 80000036 NAND Err:[NC_ProbeIfToggleDDR_Ex] err code: 80000036 NAND Err:[NC_ProbeIfToggleDDR_Ex] err code: 80000036 NAND Err:[NC_ProbeIfToggleDDR_Ex] err code: 80000036 NAND Err:[NC_ProbeIfToggleDDR_Ex] err code: 80000036 NAND Err:[NC_ProbeIfToggleDDR_Ex] err code: 80000036 NAND Err:[NC_ProbeIfToggleDDR_Ex] err code: 80000036 NAND Err:[NC_ProbeIfToggleDDR_Ex] err code: 80000036 NAND Err:[NC_ProbeIfToggleDDR_Ex] err code: 80000036 NAND Err:[NC_ProbeIfToggleDDR_Ex] err code: 80000036 NAND Err:[NC_DetectDDRTiming] Err, NAND, can't detect right timing NAND Err:[NC_Init] ERROR, NAND config timing, Toggle-DDR, Err Code:8000004Eh NAND Err:[drvNAND_RefreshCIS] NC_Init Fail ErrCode: 8000004E incorrect device type in UBILD Partition UBILD not found! save env fail do_cvt_pm_wakeupkey 381 WAKEUP DEVICE[0x0] AC on Check USB port[0]: [USB] usb_lowlevel_init++ [USB] USB EHCI LIB VER: 2014.10.02 [USB] Port 0 is Enabled [USB] TV_usb_init (UTMI Init) ++ [USB] UTMI Base 1F207500 [USB] UHC Base 1F204800 [USB] USBC Base 1F200E00 [USB] BC Base 1F246C00 [USB] config miu select [70] [B8] [FF] ][FF] [USB] TV_usb_init-- [USB] Usb_host_Init++ [USB] Async base addr: 0x41D4300 [USB] Reg 0x28: 0x4300 0x41D [USB] disable run [USB] Host Speed:2 [USB] enable aynch [USB] Usb_host_Init-- [USB] usb_lowlevel_init-- scanning bus for devices... [USB] control1 max:40
[USB] interface[0] conf:1 value 8: 1 USB Device(s) found scanning bus for storage devices... [USB] bulk max packet size: ep(out) 0x200, ep2(in) 0x200 [USB] bulk0 is out [USB] USBSTS USB Error... [USB] Send Error USBSTS Status:3 [USB] USB Error Interrupt Event... [USB] bQHStatus:40 [USB] qHD Status STALL max lun:0 1 Storage Device(s) found [0;31m[ERROR] del_bootargs_cfg:371: [0mNo env 'bootargs' ** Partition 0 not valid on device 0 **
** Unable to use usb 0:0 for fatload ** reading NANDBIN.txt
** Unable to read "NANDBIN.txt" from usb 0:1 ** ** Partition 2 not valid on device 0 **
** Unable to use usb 0:2 for fatload ** ** Partition 3 not valid on device 0 **
** Unable to use usb 0:3 for fatload ** ** Partition 4 not valid on device 0 **
** Unable to use usb 0:4 for fatload ** ** Partition 0 not valid on device 0 **
** Unable to use usb 0:0 for fatload ** reading FAC_BOOT_6486.cvt
** Unable to read "FAC_BOOT_6486.cvt" from usb 0:1 ** ** Partition 2 not valid on device 0 **
** Unable to use usb 0:2 for fatload ** ** Partition 3 not valid on device 0 **
** Unable to use usb 0:3 for fatload ** ** Partition 4 not valid on device 0 **
** Unable to use usb 0:4 for fatload ** ** Partition 0 not valid on device 0 **
** Unable to use usb 0:0 for fatload ** reading UMC_KMODE.txt
** Unable to read "UMC_KMODE.txt" from usb 0:1 ** ** Partition 2 not valid on device 0 **
** Unable to use usb 0:2 for fatload ** ** Partition 3 not valid on device 0 **
** Unable to use usb 0:3 for fatload ** ** Partition 4 not valid on device 0 **
** Unable to use usb 0:4 for fatload ** ** Partition 0 not valid on device 0 **
** Unable to use usb 0:0 for fatload ** reading allupgrade_6486.bin
** Unable to read "allupgrade_6486.bin" from usb 0:1 ** ** Partition 2 not valid on device 0 **
** Unable to use usb 0:2 for fatload ** ** Partition 3 not valid on device 0 **
** Unable to use usb 0:3 for fatload ** ** Partition 4 not valid on device 0 **
** Unable to use usb 0:4 for fatload ** ** Partition 0 not valid on device 0 **
** Unable to use usb 0:0 for fatload ** reading allupgrade_6486_SOS.bin
** Unable to read "allupgrade_6486_SOS.bin" from usb 0:1 ** ** Partition 2 not valid on device 0 **
** Unable to use usb 0:2 for fatload ** ** Partition 3 not valid on device 0 **
** Unable to use usb 0:3 for fatload ** ** Partition 4 not valid on device 0 **
** Unable to use usb 0:4 for fatload ** [0;31m[ERROR] del_bootargs_cfg:371: [0mNo env 'bootargs' -- Staring normal mode! [AT][MBoot][Driver Init][2718] mtdparts variable not set, see 'help mtdparts' Device nand0 not found! Error initializing mtdparts! MPOOL volume not found Warnning!!!! bootargs doesn't exist, add a new one!! incorrect device type in UBILD Partition UBILD not found! save env fail mtdparts variable not set, see 'help mtdparts' Device nand0 not found! Error initializing mtdparts! [0;31m[ERROR] LoadMMAP:694: [0mmount CONFIG fail [0;31m[ERROR] init_mmap:517: [0mload mmap fail [0;31m[ERROR] get_mmap:485: [0minit mmap fail [0;31m[ERROR] LoadMMAP:688: [0mLoadMMAP fail last time, skip it! [0;31m[ERROR] init_mmap:517: [0mload mmap fail [0;31m[ERROR] get_mmap:485: [0minit mmap fail [0;31m[ERROR] LoadMMAP:688: [0mLoadMMAP fail last time, skip it! [0;31m[ERROR] init_mmap:517: [0mload mmap fail [0;31m[ERROR] get_mmap:485: [0minit mmap fail [0;31m[ERROR] LoadMMAP:688: [0mLoadMMAP fail last time, skip it! [0;31m[ERROR] init_mmap:517: [0mload mmap fail [0;31m[ERROR] get_mmap:485: [0minit mmap fail [0;31m[ERROR] LoadMMAP:688: [0mLoadMMAP fail last time, skip it! [0;31m[ERROR] init_mmap:517: [0mload mmap fail [0;31m[ERROR] get_mmap:485: [0minit mmap fail [0;31m[ERROR] LoadMMAP:688: [0mLoadMMAP fail last time, skip it! [0;31m[ERROR] init_mmap:517: [0mload mmap fail [0;31m[ERROR] get_mmap:485: [0minit mmap fail [0;31m[ERROR] LoadMMAP:688: [0mLoadMMAP fail last time, skip it! [0;31m[ERROR] init_mmap:517: [0mload mmap fail [0;31m[ERROR] get_mmap:485: [0minit mmap fail [0;31m[ERROR] LoadMMAP:688: [0mLoadMMAP fail last time, skip it! [0;31m[ERROR] init_mmap:517: [0mload mmap fail [0;31m[ERROR] get_mmap:485: [0minit mmap fail [0;31m[ERROR] LoadMMAP:688: [0mLoadMMAP fail last time, skip it! [0;31m[ERROR] init_mmap:517: [0mload mmap fail [0;31m[ERROR] get_mmap:485: [0minit mmap fail [0;31m[ERROR] LoadMMAP:688: [0mLoadMMAP fail last time, skip it! [0;31m[ERROR] init_mmap:517: [0mload mmap fail [0;31m[ERROR] get_mmap:485: [0minit mmap fail [0;31m[ERROR] LoadMMAP:688: [0mLoadMMAP fail last time, skip it! [0;31m[ERROR] init_mmap:517: [0mload mmap fail [0;31m[ERROR] get_mmap:485: [0minit mmap fail [0;31m[ERROR] LoadMMAP:688: [0mLoadMMAP fail last time, skip it! [0;31m[ERROR] init_mmap:517: [0mload mmap fail [0;31m[ERROR] get_mmap:485: [0minit mmap fail [0;31m[ERROR] LoadMMAP:688: [0mLoadMMAP fail last time, skip it! [0;31m[ERROR] init_mmap:517: [0mload mmap fail [0;31m[ERROR] get_mmap:485: [0minit mmap fail [0;31m[ERROR] LoadMMAP:688: [0mLoadMMAP fail last time, skip it! [0;31m[ERROR] init_mmap:517: [0mload mmap fail [0;31m[ERROR] get_mmap:485: [0minit mmap fail [0;31m[ERROR] LoadMMAP:688: [0mLoadMMAP fail last time, skip it! [0;31m[ERROR] init_mmap:517: [0mload mmap fail [0;31m[ERROR] get_mmap:485: [0minit mmap fail [0;31m[ERROR] LoadMMAP:688: [0mLoadMMAP fail last time, skip it! [0;31m[ERROR] init_mmap:517: [0mload mmap fail [0;31m[ERROR] get_mmap:485: [0minit mmap fail [0;31m[ERROR] LoadMMAP:688: [0mLoadMMAP fail last time, skip it! [0;31m[ERROR] init_mmap:517: [0mload mmap fail [0;31m[ERROR] get_mmap:485: [0minit mmap fail [0;31m[ERROR] LoadMMAP:688: [0mLoadMMAP fail last time, skip it! [0;31m[ERROR] init_mmap:517: [0mload mmap fail [0;31m[ERROR] get_mmap:485: [0minit mmap fail [0;31m[ERROR] LoadMMAP:688: [0mLoadMMAP fail last time, skip it! [0;31m[ERROR] init_mmap:517: [0mload mmap fail [0;31m[ERROR] get_mmap:485: [0minit mmap fail [0;31m[ERROR] LoadMMAP:688: [0mLoadMMAP fail last time, skip it! [0;31m[ERROR] init_mmap:517: [0mload mmap fail [0;31m[ERROR] get_mmap:485: [0minit mmap fail [0;31m[ERROR] LoadMMAP:688: [0mLoadMMAP fail last time, skip it! [0;31m[ERROR] init_mmap:517: [0mload mmap fail [0;31m[ERROR] get_mmap:485: [0minit mmap fail [0;31m[ERROR] LoadMMAP:688: [0mLoadMMAP fail last time, skip it! [0;31m[ERROR] init_mmap:517: [0mload mmap fail [0;31m[ERROR] get_mmap:485: [0minit mmap fail [0;31m[ERROR] LoadMMAP:688: [0mLoadMMAP fail last time, skip it! [0;31m[ERROR] init_mmap:517: [0mload mmap fail [0;31m[ERROR] get_mmap:485: [0minit mmap fail [0;31m[ERROR] LoadMMAP:688: [0mLoadMMAP fail last time, skip it! [0;31m[ERROR] init_mmap:517: [0mload mmap fail [0;31m[ERROR] get_mmap:485: [0minit mmap fail [0;31m[ERROR] LoadMMAP:688: [0mLoadMMAP fail last time, skip it! [0;31m[ERROR] init_mmap:517: [0mload mmap fail [0;31m[ERROR] get_mmap:485: [0minit mmap fail [0;31m[ERROR] LoadMMAP:688: [0mLoadMMAP fail last time, skip it! [0;31m[ERROR] init_mmap:517: [0mload mmap fail [0;31m[ERROR] get_mmap:485: [0minit mmap fail [0;31m[ERROR] LoadMMAP:688: [0mLoadMMAP fail last time, skip it! [0;31m[ERROR] init_mmap:517: [0mload mmap fail [0;31m[ERROR] get_mmap:485: [0minit mmap fail [0;31m[ERROR] LoadMMAP:688: [0mLoadMMAP fail last time, skip it! [0;31m[ERROR] init_mmap:517: [0mload mmap fail [0;31m[ERROR] get_mmap:485: [0minit mmap fail [0;31m[ERROR] LoadMMAP:688: [0mLoadMMAP fail last time, skip it! [0;31m[ERROR] init_mmap:517: [0mload mmap fail [0;31m[ERROR] get_mmap:485: [0minit mmap fail [0;31m[ERROR] LoadMMAP:688: [0mLoadMMAP fail last time, skip it! [0;31m[ERROR] init_mmap:517: [0mload mmap fail [0;31m[ERROR] get_mmap:485: [0minit mmap fail [0;31m[ERROR] LoadMMAP:688: [0mLoadMMAP fail last time, skip it! [0;31m[ERROR] init_mmap:517: [0mload mmap fail [0;31m[ERROR] get_mmap:485: [0minit mmap fail [0;31m[ERROR] pattern_search:813: [0mOne of the parameters is null pointer no miu_setting information in mmap.ini [0;31m[ERROR] pattern_search:813: [0mOne of the parameters is null pointer no miu_setting information in mmap.ini [0;31m[ERROR] pattern_search:813: [0mOne of the parameters is null pointer no miu_setting information in mmap.ini [0;31m[ERROR] pattern_search:813: [0mOne of the parameters is null pointer no miu_setting information in mmap.ini [0;31m[ERROR] pattern_search:813: [0mOne of the parameters is null pointer no miu_setting information in mmap.ini [0;31m[ERROR] pattern_search:813: [0mOne of the parameters is null pointer no miu_setting information in mmap.ini [0;31m[ERROR] syncMmap2bootargs:943: [0msync LX_MEM fail [0;31m[ERROR] do_sync_mmap_to_env:1280: [0msync the part of mmap info to bootargs fail mtdparts variable not set, see 'help mtdparts' Device nand0 not found! Error initializing mtdparts! [0;31m[ERROR] vfs_getsize:225: [0mfilesystem is not mounted [0;31m[ERROR] loadscript:763: [0mNo enough buffer or path fail(/sys.ini) : [src/MsUtility.c] [loadscript] mtdparts variable not set, see 'help mtdparts' Device nand0 not found! Error initializing mtdparts! [0;31m[ERROR] vfs_getsize:225: [0mfilesystem is not mounted [0;31m[ERROR] prepare_nand_dbtable:911: [0m get logo_size fail...>>>:0 [0;31m[ERROR] write_dbtable:1050: [0mflash database not ready...>>> [0;31m[ERROR] do_dbtable_init:219: [0mdbtable init fail Error: Unrecorgnized NAND mtdparts variable not set, see 'help mtdparts' Device nand0 not found! Error initializing mtdparts! MPOOL volume not found mtdparts variable not set, see 'help mtdparts' Device nand0 not found! Error initializing mtdparts! [0;31m[ERROR] raw_read_nand:832: [0mcheck_ubi_partition: UBILD fail [0;31m[ERROR] raw_read:560: [0mread raw data fail mtdparts variable not set, see 'help mtdparts' Device nand0 not found! Error initializing mtdparts! [0;31m[ERROR] raw_read_nand:832: [0mcheck_ubi_partition: UBILD fail [0;31m[ERROR] raw_read:560: [0mread raw data fail [0;31m[ERROR] _SignatureLoad:371: [0mSignatureLoad fail [0;31m[ERROR] LoadSignature:1295: [0mLoad signature fail Error: Unrecorgnized NAND Error: Unrecorgnized NAND Error: Unrecorgnized NAND Error: Unrecorgnized NAND Saving Environment to UBI... incorrect device type in UBILD Partition UBILD not found! save env fail [0;31m[ERROR] _setKeyBankProcessStatus:1138: [0msetenv fail [0;31m[ERROR] setKeyBankProcessStatusDone:1108: [0msete down [0;31m[ERROR] RestoreCustomerKeyBank:1255: [0mfail [0;31m[ERROR] LoadCustomerKeyBank:1365: [0mrestore key bank fail jump_to_console start!! << MStar >># << MStar >># << MStar >># << MStar >># << MStar >># << MStar >># << MStar >># << MStar >># << MStar >># help ? - alias for 'help' BrickTerminator- BrickTerminator CmdPerformanceTest- gettime - Get the system executing time
SecureBootCmd- SecureBootCmd
SecureInit- Init security booting.
UpdateNuttx- upgrade nuttx. ac - set a new config to the bootargs
audio_preinit- audio_preinit - Init audio driver
authenticate- authenticate the kernel image authenticateAN- authenticate android's boot and recover image base - print or set address offset bdinfo - print Board Info structure bin2nand- bin2nand usbport withsparedata?1:0 binname partition_name - read binary files and restore it to nand
bininfo - bininfo -print parameter information of each partition and environment
bintoolini- bintoolini [usb port]: Generate ini file for nand bin tool
boot - boot default, i.e., run 'bootcmd' bootKL - bootKL
bootNuttx- bootNuttx - core1 run at Nuttx
bootargs_set- Set info exchange and set to boot args. bootcheck- bootcheck - Do boot check
bootm - boot application image from memory bootmusic- bootmusic - play music
bootp - boot image via network using BOOTP/TFTP protocol bstar - bstar - update softwave system automatically via backup
checkfile- check file exist in u disk,and set the partition. checkstr- check_str_resume
chpart - change active partition cleanallenv- cleanall environment variables to persistent storage cmp - memory compare cnstar - do net update from the specified file that is in oad partition
config2env- Set config to environment. config_raw_io- Config the target device for raw I/O coninfo - print console devices and information costar - do oad update from the specified file that is in oad partition
cp - memory copy crc32 - checksum calculation custar - do usb update from the specified file that is in usb.
cvt_facboot_checkusb- do cvt_usb_facparse from the specified file that is in usb.
cvt_pm_wakeupkey- do cvt_usb_facparse from the specified file that is in usb.
dbg - set debug message level. Default level is INFO dbgTee - - set tee's debug level
dbtable_init- dbtable_init - let data is ready (logo, music, panel, ursa).
dc - delete the specific cofig that is in the bootargs
delay - delay time, time unit is ms
destroy_logo- destroy_logo - Stop logo display
dhcp - boot image via network using DHCP/TFTP protocol dont_overwrite- This serial apis are for protecting the specific partitions are overwrited. ex: customer This cmd is used to register which partition should not be overwrite
dont_overwrite_free- This serial apis are for protecting the specific partitions are overwrited. ex: customer This cmd is used to free all registered partitions.
dont_overwrite_init- This serial apis are for protecting the specific partitions are overwrited. ex: customer This cmd is used to init this function
draw_jpg- blt_jpg - Blt JPG
draw_pixel- draw_pixel - draw a pixel with color
draw_progress- draw_string - draw string with color
draw_rect- draw_rect - draw rect with color
draw_string- draw_string - draw string with color
du - du - Disable UART
dumpSignature- dump the signature dynpart - dynamically calculate partition table based on <mtd-def>/'dynparts' and BBT (it is better to set the last partition size to SIZE_REMAINING) ebist - PHY loopback test echo - echo args to console editenv - edit environment variable edump - EMAC Register settings dump eloopback- Long loopback test env - environment handling commands epd - emac power down estart - EMAC start ewavetest- EMAC wave test exit - exit script false - do nothing, unsuccessfully fatfilesize- fatfilesize - load binary file from a dos filesystem
fatinfo - print information about filesystem fatload - load binary file from a dos filesystem fatls - list files in a directory (default /) fatpartload- fatpartload - load binary file from a dos filesystem
fatwrite- fatwrite - write binary file to a dos filesystem
fileSegRSA- do file segment rsa authendication filelist- Dump the file list.
filelisttest- This command is only for file list test
filepartload- load part of a file to RAM filepartloadSegAES- load a part of file to RAM and do descrypted force_overwrite- This serial apis are for force write and re-create partitions. This cmd is used to register which partition should force overwrite
force_overwrite_init- This serial apis are for force write and re-create partitions. This cmd is used to register which partition should force overwrite
get_mmap- get memory info from supernova's mmap gettime - gettime - Get the system executing time
go - start application at address 'addr' gpio - GPIO Command: help - print command description/usage i2c - I2C sub-system if_boot_to_pm- if boot to PM
iminfo - print header information for application image imxtract- extract a part of a multi-image initDbgLevel- Initial varaible 'dbgLevel' init_raw_io- init raw_io module ir_delay- ir_delay - delay 300ms for IR detect.
led - See led commands load_nuttx_config- - load nuttx_config.bin from storage
loadb - load binary file over serial line (kermit mode) loadenv - loadenv - load env for nand
loads - load S-Record file over serial line loadspi - load data from SPI loady - load binary file over serial line (ymodem mode) loop - infinite loop on address range m2e - Restore the address and len to env from supernova's mmap
macaddr - setup EMAC MAC addr mbup - mboot upgrade
md - memory display memtest - Get the performance of memory miuProtect- miuProtect - Protect miu
mm - memory modify (auto-incrementing address) mscompress7- Compress or decompress lzma files msg - print string - msg [string]
mstar - update kernal & root file system automatically by script file mtdparts- define flash/nand partitions mtest - simple RAM read/write test mversion- show changelist - mversion
mw - memory write (fill) nand - NAND sub-system nandbin - nandbin usbport withsparedata?1:0 oobsize dumpC/T?1:0 bin_name partition_name - read out the contents of nand and store it to usb disk
nandbin2- nandbin2 - read out ubi partition and environment parameter at once and store it to usb disk
nandbinall- nandbinall usbport withsparedata?1:0 oobsize dumpC/T?1:0- read out the whole contents of nand and store it to usb disk
nandclk - nandclk - tune nand clock
nandinfo- nandinfo - show nand info
nboot - nboot - boot from NAND device
ncis - write cis ncisbl - write cis, bootloader and uboot or only CIS for ROM boot ncishash- write cis and hash[0-2] for Secure ROM boot nm - memory modify (constant address) nreadloop- read UBI partition looping...
nsbootblk- Show how many block count sboot is
nstar - nstar - update softwave system automatically via net
nuttxProtect- nuttx Protect - Protect nuttx
osd_create- osd_create - create osd layer
osd_destroy- osd_destroy - destroy osd layer
osd_flush- osd_flush - flush canvas to screen
ostar - ostar - update softwave system automatically via oad
ota_zip_check- do OTA zip package check.
panel_init- panel_init - init panel by panel.ini
panel_post_init- backligth on - backlight on
panel_pre_init- panel_pre_init - init panel by panel.ini
pop_raw_io_config- pop raw_io last config printenv- print environment variables push_raw_io_config- push raw_io current config raw2nand- bin2nand usbport binname phyoobsize def_filename - read raw binary files and restore it to nand
raw_io_status- get raw_io status raw_read- Read the raw datas that store in the target device Yo have to execute 'config_raw_io' before using this cmd
raw_write- Write the raw datas that store in the target deviceYo have to execute 'config_raw_io' before using this cmd
readKL - readKL
readNuttx- readNuttx - read Nuttx to malloc buffer
recovery_wipe_partition- do recovery wipe data or cache.
refreshcis- Rewrite cis for first factory boot
refreshnand- Refresh NAND for first factory boot
rescue_printenv- print environment variables from rescue env rescue_saveenv- save environment variables to the rescue env part of persistent storage rescue_setenv- set environment variables to rescue env reset - Perform RESET of the CPU riu - riu - riu command
rsa - rsa cacluate
rsv - rsv - Set reserved block as bad or good
run - run commands in an environment variable sar - sar Command: saveenv - save environment variables to persistent storage secure_driver_check- gettime - Get the system executing time
setenv - set environment variables setprogramok- Set nand program status OK
sha256 - The sha256 cacluate
showtb - Show register command table. - showtb [stage]
showvar - print local hushshell variables showversion- Show version sleep - delay execution for some time source - run script from memory spi2usb - Read data from spi to usb stest - test IO performance on continue mode or interleave mode]
store_nuttx_config- - save nuttx_config.bin to storage
store_secure_info- store secure info
sync_mmap- Sync the some id's address and len to env and bootargs from supernova's mmap
test - minimal test like /bin/sh testmode- set testmode into bootargs. tftpboot- boot image via network using TFTP protocol true - do nothing, successfully tuner_standby- tuner_standby - set tuner standby
ubi - ubi commands ubi2nand- ubi2nand - read ubi partition file and restore it to nand
ubibin - ubibin - read out ubi partition and store it to usb disk
ubifsfilesize- get file size in UBIFS volume ubifsload- load file from an UBIFS filesystem ubifsls - list files in a directory ubifsmount- mount UBIFS volume ubifspartload- load part of a file from an UBIFS filesystem ubifsumount- unmount UBIFS volume update_mode- get/set update_mode
updatemiureg- Call driver to update miu setting usb - USB sub-system usb2spi - write data from usb to spi usb_bin_check- do usb bin document check.
usbboot - boot from USB device ustar - ustar - update kernal & root file system automatically by script file
verify_sha256- This command is only for verification
version - print monitor, compiler and linker version wait_tee_ready- wait_tee_ready - wait_tee_ready
wdt_enable- wdt_enable n - set Watchdog timer to n secs
<< MStar >>#
До обновления включался, не спросил, но помоему синий экран и ни на что не реагировал.
Файлы
Прошивки
Продажа
Литература
Статьи
Для просмотра сообщения Вы должны быть Участником форума. Для этого Вам необходимо 
Зарегистрировано всего